HP EliteDesk 800 G3 Desktop Mini, HP ProDesk 600 G3 Desktop Mini, HP ProDesk 400 G3 Desktop Mini - Maintenance and Service Guide

Top cover
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Depending on the computer model, slide the cover lock switch (1) to the left , or loosen the thumbscrew
(1) on the rear panel as shown in the following images.
NOTE: If necessary, a Torx T-15 screwdriver may be used to loosen the thumbscrew.
3. Slide the access panel forward, and lift it o the computer (2).
NOTE: Your computer model may look slightly dierent from the illustrations in this section.
To install the top cover, reverse the removal procedure.
Top cover 21