HP EliteDesk 800 G3 Desktop Mini, HP ProDesk 600 G3 Desktop Mini, HP ProDesk 400 G3 Desktop Mini - Maintenance and Service Guide

Fan
1. Prepare the computer for disassembly (Preparation for disassembly on page 20).
2. Remove the top cover (Top cover on page 21).
3. Rotate the top of the fan up using the front tab (1).
4. Slide the fan toward the front of the computer (2), and then disconnect the fan cable from the system
board (3).
5. Remove the fan from the computer.
To install the fan, reverse the removal procedure.
42 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis