Quick Specs

QuickSpecs
HP ZBook 14u G5 Mobile Workstation
Technical Specifications – Security
c05830243 — DA – 16102—Worldwide — Version 5 — March 21, 2018
Page 23
SECURITY
HP Fingerprint Sensor
Voltage
3.0-3.6V
Operating temperature
14° - 167°F (-10° - 75°C)
Current consumption image
36mA
Low latency wait for finger
950 uA
Capture rate
3000 lines/sec
ESD Resistance
IEC 6100-4-2 4B (+/-15KV)
Detection Matrix
200*1 (plus another secondary line); 508 dpi, sensor area 12*3 mm
Smart Card Reader
Smart card standard
PC/SC 2.0 for Windows smart card standard
Dimensions (L x W x H)
0.41x 0.08 x 0.32 in (10.5 x 2 x 8.2 mm)
Smart Card support
ISO 7816 Class A and AB smart cards
Smart Card Interface
Smart Card Interface with T = 0 and T = 1 support Support I2C
memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041
card via
external EEPROM
Operating systems
Normal Mode With card present, before being suspended: 40.9 mA
Without card present, before being suspended: 33.16 mA After being
suspended with smart card present: 380 μA After being suspended
without smart card present: 380 μA
Features
Power Saving Mode : With card present, before being suspended:
40.6 mA Without card present: 380 μA After being suspended with
smart card present: 380 μA
• Support single slot
• Support T0, T1 protocol
• Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442,
SLE4436,
• SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041
card via external EEPROM
• Support ISO7816 Class A, B and C (5V/3V/1.8V) card
• Implemented as an USB full speed device with bulk transfer
endpoint, Mass
• Storage endpoint
• Built-in PLL for USB and Smart Card clocks requirement
• Support EEPROM for USB descriptors customization (PID/VID/
iManufacturer/iProduct/Serial Number), Direct Web Page Link, and
accessing memory card module.
• EEPROM programmable via USB interface
• Support software update for memory card module
• Support Direct Web Page Link via configuration in external EEPROM
• Support short APDU and extended APDU
• Compatible with Microsoft USB-CCID driver
• Support remote wake up through inserting card/removing card
• Support USB selective suspend
• Support Power Saving Mode (Using one pin to select between
Normal/PWR Saving Mode)
• Support card power over current protection mechanism
• Built in resonator.
• Support USB LPM (Link Power Management) features.
• Embedded clock source.