Owner's manual

CX8167-ST
21
Figure 7 Sequential b uilding of vertical disk groups
1. Disks installed in first
group
2. Disks installed in second group
Adding a disk dri v e
This section describes t
he procedure for adding a Fibre Channel disk drive.
Removi ng the drive blank
1. Grasp the drive blank by the two mounting tabs (see Figure 8).
2. Lift up on the lower mounting tab and pull the blank out of the enclosure.
CXO7359B
˚
1
2
Figure 8 Removing the drive blank
1. Uppermountingtab 2. Lowermountingtab
Installing the disk drive
1. Push in the ejector button on the d
isk drive and pull the release lever down to the full open p osition.
4000/6000/8000 Enterprise Virtual Array user guide
41