Datasheet

Mezzanines
MezzaninesMezzanines
Mezzanines
Port Mapping
Port MappingPort Mapping
Port Mapping Port mapping differs slightly between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version.
HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent
management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard
Administrator Guide, Enclosure Setup and Installation Guide provides detailed information on port
mapping.
c7000 Half Height Server Blade
c7000 Half Height Server Bladec7000 Half Height Server Blade
c7000 Half Height Server Blade c7000 Full Height Sever Blade
c7000 Full Height Sever Bladec7000 Full Height Sever Blade
c7000 Full Height Sever Blade
c3000 Half Height Server Blade
c3000 Half Height Server Bladec3000 Half Height Server Blade
c3000 Half Height Server Blade c3000 Full Height Sever Blade
c3000 Full Height Sever Bladec3000 Full Height Sever Blade
c3000 Full Height Sever Blade
The following are supported configurations for the HP Virtual Connect 4Gb Fibre Channel Module. Please note that other
interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and Pass-Thru
modules will operate per their default configurations. Any moves, adds, or changes to servers which are connected to non-Virtual
Connect modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual
Connect Modules.
The HP Virtual Connect 4Gb Fibre Channel Module requires a Virtual Connect Ethernet Module installed in the system for
management and administration. The HP Virtual Connect 4Gb Fibre Channel Module requires VCFC Firmware version 1.30 or
higher. Following are more details:
QuickSpecs
HP Virtual Connect 4Gb Fibre Channel Module for
HP Virtual Connect 4Gb Fibre Channel Module forHP Virtual Connect 4Gb Fibre Channel Module for
HP Virtual Connect 4Gb Fibre Channel Module for
c-Class BladeSystem
c-Class BladeSystemc-Class BladeSystem
c-Class BladeSystem
Supported Products
DA - 13128 Worldwide — Version 4 — August 17, 2010 Page 5