Instruction Manual

4. Browse to https://192.168.0.1 :2372 and log in as an HP EVA administrator. The default user name
is admin. No password is required. The WOCP GUI appears.
IMPORTANT:
IfyouchangethepasswordfortheadministratororuseraccountfortheWOCP,besureto
record the new passwords since they cannot be cleared without resetting the management
module.
HP recommends that you change the default passwords.
5. Select Administrator Options > Configure Network Options.
6. Enter a new I P address and other network settings that apply.
IMPORTANT:
IP addresses 10.0.0.0 to 10.255.255.255 are not supported. See Private and public networks.
7. Click Save Ch
anges. The IP address changes immediately, causing you to lose connectivity to
the WOCP.
The new IP add ress is stored and remains in effect, even when the storage system is shut down or
restarted.
IMPORTANT:
The new IP add
ress will be lost if the storage system is uninitialized or the management
module is reset.
8. RemovetheLANcabletotheprivatenetworkorlaptopandreconnectthecabletothepublicnetwork.
9. From a computer on the public network, browse to ht tps://n ew IP address:2372 and log in. The
WOCP GUI appears.
Procedure when on a private network (reestablishing the IP address)
Use this procedure when the management mo du le is connected through a private net work.
1. Press and hold the recessed Reset button for 4 – 5 seconds, then release it. This sets an IP address of
192.168.0.1 in private address space.
IMPORTANT:
If the IP address saved in memory has been lost, you cannot bro wse to the WOCP until you perform
this step.
1. LAN connector 2. Reset but ton 3. Management module
2. Browse to h t t p s : / / 19 2 .16 8 . 0 .1: 2 372 and log in as an HP EVA administrator. The user name is admin.
No pass
word is required. The WOCP GUI appears.
EVA Web-based Operator Control Panel 1.0
19