User's Guide

Status Description
The light next to the Wireless button and the Signal Bars on the
display are blinking together in sync.
The printer is in the Wi-Fi Protected Setup (WPS) progress mode.
The light next to the Wireless button blinks fast three times and
then returns to its prior state.
The wireless capability of the printer is disabled.
Change the wireless settings. For more information, see
Wireless settings on page 28.
During the wireless setup, the light next to the Wireless button is
blinking, the Wireless Attention icon is on, and the Signal Bars
are cycling.
There is no wireless signal.
– Make sure your wireless router or access point is powered
on.
– Move the printer closer to the wireless router.
The Wireless Attention icon on the display is blinking in sync with
the light next to the Wireless button
The printer has a problem connecting to the wireless network.
Press the Wireless button ( ) and the Information button
( ) together to run the wireless test, and then review the
test report for information on how to solve the problem.
8 Chapter 1 Printer parts ENWW