HP 4410t Mobile Thin Client Administrator Reference Guide
© Copyright 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
iv Safety warning notice
Table of contents 1 Notebook tour Identifying the hardware ....................................................................................................................... 1 Display ................................................................................................................................. 1 Top components .................................................................................................................. 2 Pointing devices .........................................
Creating a new user account ............................................................................................. 19 Creating user profiles ......................................................................................................... 19 4 Applications Remote Desktop Connection ............................................................................................................. 21 HP Virtual Client Essentials ........................................................................
6 Power Power control and light locations ........................................................................................................ 34 Shutting down the computer ............................................................................................................... 35 Setting power options ......................................................................................................................... 36 Using power-saving states ...............................................
Using wireless controls ....................................................................................................................... 48 Using the wireless button ................................................................................................... 48 Using operating system controls ........................................................................................ 48 Using WLAN .....................................................................................................
12 Using Media Card Reader cards Inserting a digital card ........................................................................................................................ 66 Removing a digital card ...................................................................................................................... 67 13 Using ExpressCards Configuring an ExpressCard ..............................................................................................................
Appendix A Routine care Cleaning the display ........................................................................................................................... 88 Cleaning the keyboard ....................................................................................................................... 88 Traveling and shipping ....................................................................................................................... 88 Index ...........................................
1 Notebook tour Identifying the hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. Display NOTE: Your computer may look slightly different from the illustration in this section. Component Description (1) Internal display switch Turns off the display if the display is closed while the power is on. (2) Internal microphone Records sound.
Top components Pointing devices Component Description (1) TouchPad* Moves the pointer and selects or activates items on the screen. (2) Left TouchPad button* Functions like the left button on an external mouse. (3) Right TouchPad button* Functions like the right button on an external mouse. *This table describes factory settings. To view or change pointing device preferences, select Start > Control Panel > Printers and Other Hardware > Mouse.
Lights Component Description (1) Caps lock light On: Caps lock is on. (2) Info light ● On: The computer is on. ● Blinking (5 times): When the computer is on, press button to launch Info Center. ● Off: The computer is off or in the Standby state. ● On: The computer is on. ● Blinking: The computer is in the Standby state. ● Off: The computer is off.
Buttons, switches, and speakers Component Description (1) Speakers (2) Produce sound. (2) Internal display switch Turns off the display if the display is closed while the power is on. (3) Info button Launches Info Center. (4) Power button ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to shut down the computer. ● When the computer is in the Standby state, press the button briefly to exit Standby.
Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Executes frequently used system functions when pressed in combination with a function key or the esc key. (3) Windows logo key Displays the Windows Start menu. (4) Windows applications key Displays a shortcut menu for items beneath the pointer. (5) Embedded numeric keypad keys Can be used like the keys on an external numeric keypad.
Front components Component Description (1) Drive light Blinking: The flash drive or optional optical drive is being accessed. (2) Wireless button Turns the wireless feature on or off, but does not establish a wireless connection. NOTE: A wireless network must be set up in order to establish a wireless connection. (3) (4) 6 Wireless light Media Card Reader ● Blue: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device, is on.
Right-side components Component Description (1) USB ports (2) Connect optional USB devices. (2) RJ-11 (modem) jack Connects a modem cable. (3) Optical drive (select models only) Reads optical discs. (4) Optical drive light (select models only) Blinking: The optical drive is being accessed. (5) Battery light ● Amber: A battery is charging. ● Turquoise: A battery is close to full charge capacity.
Component Description (1) ExpressCard slot Supports optional ExpressCards. (2) Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. (3) RJ-45 (network) jack Connects a network cable. (4) Vent Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating.
Wireless antennas Wireless antennas send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer. Component Description WLAN antennas (2) Holds wireless local area network antennas. NOTE: For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region.
◦ Product name (1). This is the product name affixed to the front of your computer. ◦ Serial number (s/n) (2). This is an alphanumeric number that is unique to each product. ◦ Part number/Product number (p/n) (3). This number provides specific information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. ◦ Model description (4).
2 HP Write Filters The File-Based Write Filter (FBWF) and the Enhanced Write Filter (EWF) provides two distinct ways to provide a secure environment for your computer by protecting it from unauthorized writes to storage and file systems. FBWF operates at the file level and EWF operates at the sector level. Only one write filter can be selected and active at one time.
When you enter the fbwfmgr [boot command] syntax, use the following commands in the boot command variable of the command line: ● /disable Disables the write filter on the next restart. ● /enable Enables the write filter on the next restart. ● /displayconfig Displays all current configuration information for the write filter including filter state, protected volumes list, cache compression state, overlay cache threshold, cache pre-allocation status and write through paths.
Enable/disable cache pre-allocation. ● Set Cache Threshold Set the amount of RAM in MB that the FBWF cache can use. Using the File-Based Write Filter status utility The FBWF status utility creates an icon in the notification area at the far right of the taskbar that shows the status of the FBWF. You can right-click the icon to display and execute the available options. The FBWF Status icon displays the following states: ● Red lock: FBWF is disabled. ● Green lock: FBWF is enabled.
Enhanced Write Filter The Enhanced Write Filter (EWF) provides a secure environment for your computer by protecting it from undesired flash memory writes (the operating system and functional software components reside in flash memory). The write filter also extends the life of the computer by preventing excessive flash write activity. Instead of allowing writes directly to the flash memory, it intercepts all flash writes and caches them.
When you enter the ewfmgr [boot command] syntax, use the following commands in the boot command variable of the command line: ● -all Displays information about all protected volumes and performs a command, such as disable, enable, and commit, on each volume, if specified. ● -commit Commits all current level data in the overlay to the protected volume, and resets the current overlay value to 1. You can combine -commit with the -disable command to commit and then disable.
Commits all current-level data in the overlay to the protected volume, and resets the current overlay value to 1. Using the Enhanced Write Filter status utility The EWF status utility creates an icon in the notification area at the far right of the taskbar that shows the status of the filter. You can right-click the icon to display and execute the available options. The EWF Status icon displays the following states: ● Red lock: EWF is disabled. ● Green lock: EWF is enabled.
3 Configuration Local drives The following sections describe the local drives on your computer. Drive Z Drive Z (HP RAMDisk) is the onboard volatile memory on the logic board of the computer. Because drive Z is volatile memory, HP recommends that you do not use this drive to store information that you want to retain. HP RAMDisk The RAMDisk is volatile memory space set aside for temporary data storage.
CAUTION: If the available free space on the flash drive is reduced to below 3 MB, the computer becomes unstable. A write filter is used by the computer for security and to prevent excessive flash write activity. Changes to the computer configuration are lost when the computer is restarted unless the write filter cache is disabled or a -commit command is issued during the current boot session. Refer to Chapter 2, “HP Write Filters,” for additional information.
User accounts Creating a new user account NOTE: Be sure to disable the write filter cache during the boot session in which a new account is created. The write filter must be reenabled after saving all of your permanent changes to flash. You must log on as administrator to create user accounts locally or remotely. Because of local flash/ disk space constraints, you should keep the number of additional users to a minimum.
11. Type Administrators in the Enter the Object Names to Select box. 12. Click Check Names, and then click OK. The newly created user is now a member of both the Administrator and User groups and should match the privileges of the default user account.
4 Applications Remote Desktop Connection The Remote Desktop Connection utility allows you to establish connections to a Windows Terminal Server or to access remote applications using Microsoft Remote Desktop Protocol (RDP). For additional information on how to use the Microsoft Remote Desktop Connection utility, go to the Microsoft Web site at http://www.microsoft.com.
HP Virtual Client Essentials HP Virtual Client Essentials is an advanced software suite that includes multimedia, brokering, and streaming solutions. The HP Virtual Client Essentials suite includes the following utilities: ● HP Remote Desktop Protocol (RDP) Multimedia and USB Enhancements ● HP Remote Graphics Software (RGS) ● HP Session Allocation Manager (SAM) Client For additional information, go to the HP Web site at http://www.hp.com/go/vce.
Altiris Client Agent The Altiris Client Agent allows the Altiris server to discover valid clients that are added to the network. The agent carries out assignments and reports the status of individual computers to the Altiris server. For additional information about Altiris Client Agent, go to the HP Web site at http://www.hp.com/go/ easydeploy.
HP Device Manager HP Device Manager is a management solution that communicates with a large number of HP thin clients, and provides remote and asset management, reporting, and security. HP Device Manager is based on industry-standard technologies, such as RDMS and SSL encryption. For additional information about HP Device Manager, go to the HP Web site at http://www.hp.com/support.
HP Client Automation HP Client Automation allows an administrator, who works from a single console, continuous visibility into the state of client devices, and reduces the complexity and effort of maintaining the appropriate software, security patches, and operating system images. For additional information about HP Client Automation, go to the HP Web site at http://www.hp.com/go/easydeploy. HP DHCP Settings Update Client The HP DHCP Settings Update Client is a utility located in the Control Panel.
HP ThinState Capture The HP ThinState Capture tool is a wizard-based utility that you can use to capture an HP XP Embedded image, which you can then deploy to another HP computer of identical model and hardware. NOTE: HP ThinState Capture is not a standalone utility and can only be accessed by the administrator from within the computer image. Save all data on the USB flash drive prior to performing this procedure. 1. Select Start > Control Panel > HP ThinState Capture. 2. Click Next.
Microsoft Internet Explorer Version 7.0 of the Microsoft Internet Explorer browser is installed locally on the computer. The Internet options settings for the browser have been preselected at the factory to limit writing to the flash memory. These settings should not be modified. You can access another browser through an ICA or RDP account if you need more browser resources. Windows Media Player Version 11 of Windows Media Player contains security, performance, and functionality improvements.
5 Pointing devices and keyboard Using pointing devices To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go. Use the TouchPad buttons like the corresponding buttons on an external mouse. Setting pointing device preferences To access Mouse Properties, select Start > Control Panel > Printers and Other Hardware > Mouse.
Function Hotkey Display system information. fn+esc Open Help and Support. fn+f1 NOTE: If Help and Support is not available, visit the HP support Web site at http://www.hp.com/support. Open the Print Options window. fn+f2 Open a Web browser. fn+f3 Switch the screen image between computer display and external display. fn+f4 Initiate Standby. fn+f5 Initiate QuickLock. fn+f6 Decrease screen brightness. fn+f7 Increase screen brightness. fn+f8 Mute speaker sound.
Displaying system information Press fn+esc to display information about system hardware components and the system BIOS version number. In the Windows fn+esc display, the version of the system BIOS (basic input-output system) is displayed as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS date is sometimes called the system ROM version number. Opening Help and Support Press fn+f1 to open Help and Support.
CAUTION: To reduce the risk of information loss, save your work before initiating Standby. The computer must be on before you can initiate Standby. To exit Standby, briefly press the power button. NOTE: In all Windows operating system windows, references to the sleep button apply to the fn+f5 hotkey. Initiating QuickLock Press fn+f6 to lock the system. QuickLock protects your information by displaying the operating system Log On window.
Component Description (1) fn key Executes frequently used system functions when pressed in combination with a function key or the esc key. (2) Embedded numeric keypad Can be used like the keys on an external numeric keypad. (3) num lk key Enables the embedded numeric keypad when pressed in combination with the fn key. Using the embedded numeric keypad The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad.
Switching key functions on the embedded numeric keypad You can temporarily alternate the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the fn key or the fn+shift key combination. ● To change the function of a keypad key to keypad functions while the keypad is disabled, press and hold the fn key while pressing the keypad key.
6 Power Power control and light locations The following illustration and table identify and describe the power control and light locations. 34 Component Description (1) fn+f5 Initiates Standby. (2) Internal display switch Turns off the display if the display is closed while the computer is on.
Component Description (3) ● When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button to turn off the computer. ● When the computer is in the Standby state, press the button briefly to exit Standby. Power button If the computer has stopped responding and Windows shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer.
Setting power options Using power-saving states The computer has one power-saving state enabled at the factory: Standby. When Standby is initiated, the power lights blink and the screen clears. Your computer is disconnected from the network. CAUTION: To prevent possible audio and video degradation, loss of audio or video playback functionality, or loss of information, do not initiate Standby while reading from a disc or an external media card.
To hide or display the Power Meter icon: 1. Right-click the Power Meter icon in the notification area, at the right of the taskbar, and then click Adjust Power Properties. 2. Click the Advanced tab. 3. Under Options, clear the Always show icon on the taskbar check box to hide the power meter icon, or select the Always show icon on the taskbar check box to display the power meter icon. 4. Click OK. NOTE: You must commit these changes in order for them to be saved.
Displaying the remaining battery charge ▲ Double-click the Power Meter icon in the notification area, at the far right of the taskbar. The charge indicators report battery status as a percentage, which indicates the approximate amount of charge remaining in the battery. When a battery is charging, a lightning bolt icon may be superimposed over the battery icon on the Power Meter screen.
3. Remove the battery (2). Charging a battery WARNING! Do not charge the computer battery while you are onboard aircraft. The battery charges whenever the computer is plugged into external power through an AC adapter, an optional power adapter, or an optional docking device. The battery charges whether the computer is off or in use, but it charges faster when the computer is off.
Managing low battery levels The information in this section describes the alerts and system responses set at the factory. Some lowbattery alerts and system responses can be changed in Power Options. Preferences set using Power Options do not affect lights. Identifying low battery levels When a battery that is the sole power source for the computer reaches a low battery level, the battery light blinks.
Storing a battery CAUTION: To prevent damage to a battery, do not expose it to high temperatures for extended periods of time. If a computer will be unused and unplugged from external power for more than 2 weeks, remove the battery and store it separately. To prolong the charge of a stored battery, place it in a cool, dry place. NOTE: A stored battery should be checked every 6 months. If the capacity is less than 50 percent, recharge the battery before returning it to storage.
Connecting the AC adapter WARNING! To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3pin outlet.
7 Multimedia Using multimedia hardware Using the audio features The following illustration and table describe the audio features of the computer. Component Description (1) Internal microphone Records sound. (2) Speakers (2) Produce sound. (3) Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone. (4) Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, ear buds, a headset, or television audio.
Using the audio-in (microphone) jack The computer is equipped with a stereo (dual-channel) microphone jack that supports an optional stereo array or monaural microphone. Using sound recording software with external microphones allows for stereo recordings. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug. Using the audio-out (headphone) jack WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset.
If the Volume icon is not displayed in the notification area, follow these steps to add it: ● a. Select Start > Control Panel > Sounds, Speech, and Audio Devices > Change the sound scheme > Volume tab. b. Select the Place volume icon in the taskbar check box. c. Click Apply. Program volume control: Volume can also be adjusted within some programs.
To connect a video or audio device to the HDMI port: 1. Plug one end of the HDMI cable into the HDMI port on the computer. 2. Connect the other end of the cable to the video device, according to the device manufacturer's instructions. 3. Press fn+f4 to switch the image between the display devices connected to the computer. Using multimedia software The computer includes preinstalled multimedia software.
Preventing playback disruptions To reduce the possibility of playback disruption: ● Save your work and close all open programs before playing a CD or a DVD. ● Do not connect or disconnect hardware while playing a disc. Do not initiate Standby while playing a disc. Otherwise, you may see a warning message asking if you want to continue. If this message is displayed, click No. After you click No, the computer may behave in either of the following ways: ● Playback may resume.
8 Wireless About integrated wireless devices Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with a wireless local area network (WLAN) device. This device connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
NOTE: The terms wireless router and wireless access point are often used interchangeably. ● A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points that can accommodate a large number of computers and accessories and can separate critical network functions.
Connecting to a WLAN To connect to a WLAN, follow these steps: 1. Verify that the WLAN device is turned on. If it is on, the wireless light is on. If the wireless light is off, press the wireless button. 2. Open Network Connections by selecting Start > Network and Internet Connections. 3. Double-click your wireless network in the list. 4. Type the encryption key. NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “HP Write Filters,” for additional information.
9 Modem and LAN Using a modem The modem must be connected to an analog telephone line using a 6-pin, RJ-11 modem cable (purchased separately). In some countries or regions, a specific modem cable adapter is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem. WARNING! Connecting the internal analog modem to a digital line can permanently damage the modem.
2. Connect the modem cable into the RJ-11 telephone wall jack (2). Connecting a country- or region-specific modem cable adapter Telephone jacks vary by country or region. To use the modem and the modem cable outside the country or region in which you purchased the computer, you must obtain a country- or region-specific modem cable adapter. To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack, follow these steps: 52 1.
Selecting a location setting Viewing the current location selection To view the current location setting for the modem, follow these steps: 1. Select Start > Control Panel. 2. Click Date, Time, Language, and Regional Options. 3. Click Regional and Language Options. 4. Your location is displayed under Location. NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “HP Write Filters,” for additional information.
The Phone and Modem Options window is displayed. 9. Do one of the following: ● To set your new location setting as the current location, click OK. ● To select another location setting as the current location setting, select your preference from the settings in the Location list, and then click OK. NOTE: You must commit these changes in order for them to be saved. Refer to Chapter 2, “HP Write Filters,” for additional information.
Dial a telephone number, make sure there is a response from the remote modem, and then hang up. ● Set the modem to ignore dial tones. If the modem receives a dial tone it does not recognize, it does not dial and displays a “No Dial Tone” error message. To set the modem to ignore all dial tones before dialing, follow these steps: 1. Select Start > Control Panel > Printers and Other Hardware > Phone and Modem Options. 2. Then click the Modems tab. 3. Click the listing for the modem. 4.
2. Connect the other end of the cable into a network wall jack (2). WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem or telephone cable into the RJ-45 (network) jack.
10 Security Protecting the computer NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. Your computer is designed for security. All information is saved to the network and no user information can be stored on the computer. Additional security features provided with your computer can protect the computer and your data from a variety of risks.
Using passwords Most security features use passwords. Whenever you set a password, write down the password and store it in a secure location away from the computer. Note the following password considerations: ● Setup and power-on passwords are set in Computer Setup and are managed by the system BIOS. ● Windows passwords are set only in the Windows operating system. ● If you forget the setup password set in Computer Setup, you will not be able to access the utility.
Manual logon If the automatic logon is disabled by the network administrator, log on as follows: 1. In the Log On to Windows dialog box, type your information in the User Name and Password boxes. For a user, the initial user name and password are both User. For an administrator, the initial user name and password are both Administrator. 2. Click OK. Note the following considerations: ● To prevent unauthorized access to your information, change your password as soon as possible after setup.
Managing a setup password A setup password is set, changed, and deleted in Computer Setup. To set, change, or delete this password, follow these steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the “F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Setup password, and then press enter. 3.
To set, change, or delete this password, follow these steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the “F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Power-On password, and then press enter. 3. ● To set a power-on password, type the password in the New password and Verify new password fields, and then press f10.
NOTE: Your computer may look different from the illustration. The location of the security cable slot varies by model.
11 Connecting hardware Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to the computer or an optional docking device. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The computer has 4 USB ports.
Securing USB ports The USB Storage Options utility gives the network administrator control over which users can access which USB ports on a local computer. With the USB Storage Options utility, you can perform the following tasks: ● Enable storage devices ● Allow read-only access to devices ● Disable storage devices Using the USB Storage Options utility To enable or disable the USB ports, follow these steps: 64 1.
12 Using Media Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media–equipped cameras and PDAs as well as with other computers. The Media Card Reader supports the following digital card formats: ● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● MultiMediaCard 4.
Inserting a digital card CAUTION: To avoid damaging the digital card or the computer, do not insert any type of adapter into the Media Card Reader. CAUTION: To prevent damage to the digital card connectors, use minimal force to insert a digital card. 1. Hold the digital card label-side up, with the connectors facing the computer. 2. Insert the card into the Media Card Reader, and then push in on the card until it is firmly seated.
Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the digital card. Save your information and close all programs associated with the digital card. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. To remove a digital card: 1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar.
13 Using ExpressCards An ExpressCard is a high-performance PC Card that is inserted into the ExpressCard slot. Your computer supports ExpressCard/34 cards. Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). Configuring an ExpressCard Install only the software required for your device.
Inserting an ExpressCard CAUTION: To prevent damage to the computer and external media cards, do not insert a PC Card into an ExpressCard slot. CAUTION: To prevent damage to the connectors: Use minimal force when inserting an ExpressCard. Do not move or transport the computer when an ExpressCard is in use. The ExpressCard slot may contain a protective insert. To remove the insert: 1. Press in on the insert (1) to unlock it. 2. Pull the insert out of the slot (2). To insert an ExpressCard: 1.
Removing an ExpressCard CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the ExpressCard. Save your information and close all programs associated with the ExpressCard. NOTE: To stop a data transfer, click Cancel in the operating system Copying window. To remove an ExpressCard: 1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar.
14 Hardware upgrades Identifying installed drives To view the drives installed on the computer, select Start > HP System Information. Handling drives Drives are fragile computer components that must be handled with care. Refer to the following cautions before handling drives. Additional cautions are included with the procedures to which they apply.
Optical drive type Read from CD and DVD-ROM discs Write to CD-RW discs Write to DVD±RW discs Write to DVD+R DL discs DVD-ROM Yes No No No CAUTION: To prevent possible audio and video degradation, or loss of audio or video playback functionality, do not initiate Standby while reading from a CD or DVD. If Standby is initiated during playback of a disc, you may experience the following behaviors: ● Your playback may be interrupted. ● You may see a warning message asking if you want to continue.
Removing an optical disc (CD or DVD) There are 2 ways to remove a disc, depending on whether the disc tray opens normally or not. When the disc tray opens 1. Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
3. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the disc tray and place the disc in a protective case. Using external drives Removable external drives expand your options for storing and accessing information.
CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be sure that the device is turned off and the AC power cord is unplugged. 1. Connect the device to the computer. 2. If you are connecting a powered device, plug the device power cord into a grounded AC outlet. 3. Turn on the device. To disconnect an unpowered external device, turn off the device, and then disconnect it from the computer.
6. Open the display and remove the keyboard access screws. 7. Gently slide the keyboard upward (1) until the tabs on the lower edge of the keyboard clear the arm rest. Carefully lift the top edge of the keyboard (2) away from the computer. 8. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 9. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b.
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 10. Replace the keyboard by seating the tabs at the lower edge of the keyboard just above the palm rest and laying the keyboard flat (1). Gently slide the keyboard downward until the tabs are under the arm rest (2). 11. Replace the keyboard access screws. 12. Close the display and replace the battery.
13. Reconnect external power and external devices. 14. Turn on the computer.
15 Multiboot About the boot order device As the computer starts, the system attempts to boot from enabled boot devices. The MultiBoot utility, which is enabled at the factory, controls the order in which the system selects a boot device. Boot devices can include optical drives, diskette drives, a network interface card (NIC), hard drives, and USB devices. Boot devices contain bootable media or files that the computer needs to start and operate properly.
Enabling boot devices in Computer Setup The computer will boot from a USB device or a NIC device only if the device has first been enabled in Computer Setup. To enable a USB device or a NIC device as a boot device, follow these steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. 2.
Choosing Multiboot preferences You can use MultiBoot in the following ways: ● To set a new boot order that the computer uses each time it is turned on, by changing the boot order in Computer Setup. ● To dynamically choose the boot device by pressing f9 while the “F9 = Boot device menu” message is displayed in the lower-left corner of the screen when the computer starts up. ● To use MultiBoot Express to set variable boot orders.
3. In the Express Boot Popup Delay (Sec) field, select the length of time in seconds that you want the computer to display the startup location menu before it defaults to the current MultiBoot setting (when 0 is selected, the Express Boot startup location menu is not displayed). 4. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the instructions on the screen. Your preferences go into effect when the computer restarts.
16 Computer Setup Starting Computer Setup Computer Setup is a preinstalled ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer. NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections. To start Computer Setup, follow these steps: 1. Turn on or restart the computer. 2.
● To view navigation information, press f1. ● To change the language, press f2. 2. Select the File, Security, Diagnostics or System Configuration menu. 3. To exit Computer Setup, choose one of the following methods: ● To exit Computer Setup without saving your preferences, use the arrow keys to select File > Ignore changes and exit. Then follow the instructions on the screen. ● To save your preferences and exit Computer Setup, use the arrow keys to select File > Save changes and exit.
Select To do this Ignore changes and exit Cancel any changes entered during the current session and exit Computer Setup. Save changes and exit Save any changes entered during the current session and exit Computer Setup. Your changes go into effect when the computer restarts. Security menu NOTE: Some of the menu items listed in this section may not be supported by your computer. Select To do this Setup Password Enter, change, or delete a setup password.
Select Device Configurations Built-In Device Options Port Options To do this ● Set the Express Boot Popup delay in seconds. ● Set the boot order. ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows operating system is not running.
A Routine care Cleaning the display CAUTION: To prevent permanent damage to the computer, never spray water, cleaning fluids, or chemicals on the display. To remove smudges and lint, frequently clean the display with a soft, damp, lint-free cloth. If the screen requires additional cleaning, use premoistened antistatic wipes or an antistatic screen cleaner.
CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands. Security devices that use X-rays to check luggage moving on conveyor belts will not damage drives. ● If you plan to use the computer during a flight, check with the airline in advance. In-flight computer use is at the discretion of the airline.
Index A AC adapter, connecting 42 adapter, modem cable 52 administrator password 58 airport security devices 71 Altiris Client Agent 23 Altiris Web site 26 antennas 9 antennas, WLAN 9 applications key, Windows 5 audio features 43 audio-in (microphone) jack 6, 43, 44 audio-out (headphone) jack 6, 43, 44 B battery charging 39 conserving power 40 disposing 41 inserting 38 low battery levels 40 removing 38 storing 41 battery bay, identifying 8 battery light charge status 39, 40 identifying 7 battery power 37 b
inserting 72 playing 47 removing 73 DVD drive 74 DVD region settings 47 E earbuds 43 Enhanced Write Filter command line control 14 configuration interface 15 status utility 16 esc key, identifying 5 ExpressCard configuring 68 defined 68 inserting 69 removing 70 removing insert 69 stopping 70 ExpressCard slot, identifying 8 external drive 74 external monitor port 45 external monitor port, identifying 8 F File menu 85 File-Based Write Filter configuration interface 12 status utility 13 filter File-based write
local area network (LAN) cable required 55 connecting cable 55 logical drive designations 81 low battery level 40 M Media Card Reader, identifying 6 memory check 86 memory module inserting 77 removing 76 microphone (audio-in) jack 6 microphones, supported 44 modem approval label 10 modem cable connecting 51 country- or region-specific cable adapter 52 noise suppression circuitry 51 modem cable adapter 52 modem software setting/adding location 53 travel connection problems 54 monitor port, external 8 monitor
traveling with the computer modem approval label 10 wireless certification labels 10 troubleshooting modem 54 turning off the computer 35 U unresponsive system 35 USB cable, connecting 63 USB devices connecting 63 description 63 removing 63 USB hubs 63 USB legacy support 87 USB ports, identifying 7, 8, 63 USB Storage Options utility 64 User Manager utility 19 user password 58 utilities Altiris Client Agent 23 Computer Setup 57, 81, 84 DHCP Settings Update Client 25 HP Client Automation 25 HP Device Manager
