Datasheet

doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels
of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION:
CAUTION:CAUTION:
CAUTION: Always use blanking panels to fill all remaining empty front panel U-
spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE:
NOTE:NOTE:
NOTE: HP ProLiant DL rack models have fixed rails which provide support for racks
with round mounting holes and tool-free support for racks with square mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment
range of 26" - 36".
NOTE:
NOTE:NOTE:
NOTE: Support for all 2 and 4 post Telco racks and threaded hole racks requires an
additional option kit from Rack Solutions. The Rack Solutions brackets can be
purchased at: www.hp.com/go/rackandpower .
HP Intelligent Power
HP Intelligent PowerHP Intelligent Power
HP Intelligent Power
Distribution Units
Distribution UnitsDistribution Units
Distribution Units (iPDU)
iPDU Core Units
iPDU Core UnitsiPDU Core Units
iPDU Core Units
4.9kVA iPDU Core, 24A Single phase L6-30 input AF520A
8.6kVA iPDU Core, 24A Three phase L15-30 input AF522A
NOTE:
NOTE:NOTE:
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13650_na/13650_na.html
HP Rack Options
HP Rack OptionsHP Rack Options
HP Rack Options HP KVM Switch Options
HP KVM Switch OptionsHP KVM Switch Options
HP KVM Switch Options
HP 0x2x8 KVM Server Console G2 Switch AF616A
HP 0x2x16 KVM Server Console G2 Switch AF617A
NOTE:
NOTE:NOTE:
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches.
Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm .
HP Serial Console Server Options
HP Serial Console Server OptionsHP Serial Console Server Options
HP Serial Console Server Options
0x2x16 KVM Server Console G2 Switch with Virtual Media and CAC AF618A
0x2x32 KVM Server Console G2 Switch with Virtual Media and CAC AF619A
1x1Ex8 KVM IP Console Switch G2 with Virtual Media and CAC AF620A
2x1Ex16 KVM IP Console Switch G2 with Virtual Media and CAC AF621A
4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC AF622A
NOTE:
NOTE:NOTE:
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL: http://www.hp.com/go/kvm .
NOTE:
NOTE:NOTE:
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm .
Rack Kits
Rack KitsRack Kits
Rack Kits
HP Rack Cable Management Velcro Clips 379820-B21
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
HP ProLiant DL180 Generation 6 (G6)HP ProLiant DL180 Generation 6 (G6)
HP ProLiant DL180 Generation 6 (G6)
Additional Options
DA - 13248 North America — Version 35 — May 19, 2011 Page 39