Maintenance and Service Guide

Storage device
1. Prepare the computer for disassembly (see Preparation for disassembly on page 14).
2. Remove the access panel (see Access panel on page 17).
3. Disconnect the storage device power cable (1) and SATA cable (2) from the storage device.
4. Squeeze and hold the drive carrier release tabs (3).
5. Remove the drive carrier (4) from the computer.
6. Separate the drive carrier retention arms (1) from the storage device, making sure the retention pins (2)
fully release from the device.
7. Remove the storage device (3) from the drive carrier.
Reverse this procedure to install the storage device.
20 Chapter 4 Removal and replacement procedures