Getting Started
In Windows 7, if prompted for the i386 directory, replace the path specication with C:\i386, or use the
Browse button in the dialog box to locate the i386 folder. This action points the operating system to the
appropriate drivers.
Obtain the latest support software, including support software for the operating system, from
http://www.hp.com/support. Select your country and language, select Download drivers and software (and
rmware), enter the model number of the computer, and press Enter.
Customizing the monitor display
You can select or change the monitor refresh rates, screen resolution, color settings, font sizes, and power
management settings.
For more information, refer to the online documentation provided with the graphics controller utility or the
documentation that came with your monitor.
Right-click on the Windows desktop, then click Personalize to change display settings.
Turning o the computer
To properly turn o the computer, rst shut down the operating system software.
▲
Click Start > Shut down.
If you encounter issues
There are several means to diagnose and resolve potential issues. HP provides several proprietary
diagnostics tools but recommends a sequential troubleshooting approach, from the most basic root cause to
the more complex.
1. Visual inspection
2. Blink or beep codes
3. HP Support Assistant troubleshooter
4. HP PC Hardware Diagnostics
5. HP Support
6. System restore
7. System recovery
Performing basic troubleshooting
Perform the troubleshooting procedures in this section in the order presented, until your issue is resolved.
You can nd additional troubleshooting information in the comprehensive Maintenance and Service Guide
(English only) available at http://www.hp.com/support. Select Find your product, enter the model number of
the computer, and click Search.
Visual inspection: No boot, no power, no video
CAUTION: When the computer is plugged into an AC power source, there is always voltage applied to the
system board. To reduce the risk of system board or component damage, always disconnect the power cord
from the power source before opening the computer.
2 Chapter 1 Getting started in Windows 7