Quick Specs

QuickSpecs
HP ZBook Studio G5 Mobile Workstation
Technical Specifications – Environmental
c05939918 — DA – 16153 Worldwide — Version 4 — June 26, 2018
Page 36
• 2 SODIMM memory slots
• 1 HDMI 2.0 port
Spare parts are available throughout the warranty period and or for up to “5” years after the end
of production.
Batteries
This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not contain:
Mercury greater the1ppm by weight
Cadmium greater than 20ppm by weight
Battery size: CR2032 (coin cell)
Battery type: Lithium
Battery size: 6-cell high capacity Lithium-Ion battery (optional 8 cell available)
Battery type:
Additional Information
• This product is in compliance with the Restrictions of Hazardous Substances (RoHS)
directive - 2011/65/EC.
• This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive – 2002/96/EC.
• This product is in compliance with California Proposition 65 (State of California; Safe
Drinking Water and Toxic Enforcement Act of 1986).
• This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold level, see
www.epeat.net
• Plastics parts weighing over 25 grams used in the product are marked per ISO11469
and ISO1043.
• This product contains 0.0% post-consumer recycled plastic (by wt.)
• This product is 95.6% recycle-able when properly disposed of at end of life.
Packaging Materials
External:
PAPER/Corrugated
383 g
Internal:
PLASTIC/Polyethylene Expanded - EPE
90 g
PLASTIC/Polyethylene low density - LDPE
10 g
PLASTIC/Polypropylene - PP
5 g
The plastic packaging material contains at least 81.5% recycled content.
The corrugated paper packaging materials contains at least 80 % recycled content.
Material Usage
This product does not contain any of the following substances in excess of regulatory limits
(refer to the HP General Specification for the Environment at
http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/gse.pdf):
• Asbestos
• Certain Azo Colorants
• Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
• Cadmium
• Chlorinated Hydrocarbons
• Chlorinated Paraffins
• Formaldehyde
• Halogenated Diphenyl Methanes
• Lead carbonates and sulfates
• Lead and Lead compounds
• Mercuric Oxide Batteries