User Guide

Copy | 112
Copy Setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 28).
To change the menu options:
In copy mode, press (Menu) > Copy Setup on the control panel.
Item Description
Change Default Resets the value or setting to the printer’s out-of-box state.
Change Default > Original
Size
Improves the copy quality by selecting the document size for the
current copy job.
Change Default > Copies You can enter the number of copies using the number keypad.
Change Default > Collation
Set the machine to sort the copy job. For example, if you make 2
copies of a 3 page original, one complete 3 page document will
print followed by a second complete document.
• On: Prints output in sets to match the sequence of originals.
• Off: Prints output sorted into stacks of individual pages.
Change Default >
Reduce/Enlarge
Reduces or enlarges the size of a copied image (see "Reduced or
enlarged copy" on page 80).
If the machine is set Eco mode, reduce and enlarge
features are not available.
Change Default > Darkness
Adjusts the brightness level to make a copy that is easier to read,
when the original contains faint markings and dark images (see
"Darkness" on page 79)
Change Default > Original
Type
Improves the copy quality by selecting the document type for
the current copy job (see "Original Type" on page 79)