User Guide

Fax | 114
Sending setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 28).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Sending on the control panel.
Receiving setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 28).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.
Cancel Job
Cancels the delayed fax job which is saved in memory (see
"Canceling a reserved fax job" on page 96).
Item Description
Redial Times
Sets the number of redial attempts. If you enter 0, the machine
will not redial.
Redial Term Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials before any
automatic dial number is started. It is useful for accessing a PABX
exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to makes sure
the faxes are sent smoothly without any error. It may take more
time.
Fax Confirm.
Sets the machine to print a report whether a fax transmission
was successfully completed or not. If you select On-Error, the
machine prints a report only when a transmission is not
successful.
Modem speed
Select the maximum modem speed you want if the phone line
fails to sustain a higher modem speed.
Image TCR
Prints a transmission report with a minimized image of the first
page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This setting may
not be available depending on your country.
Item Description