User Guide

Installing the software | 26
Installing the software
After you have set up your machine and connected it to your computer, you must install the
printer software. You need to download software packages from the HP website to install the
printer software.
Before installing, check whether your computer’s OS support the software (see "Operating
System" on page 8).
For HP's all-inclusive help for the printer, go to www.hp.com/support/laser130MFP
.
Find the following support:
• Install and configure
• Learn and use
• Solve problems
• Download software and firmware updates
• Join support forums
• Find warranty and regulatory information
A locally connected machine is a machine directly attached to your computer using the
cable. If your machine is attached to a network, skip the following steps below and go on
to installing a network connected machine’s driver (see "Installing driver over the
network" on page 50).
Only use a USB cable no longer then 3 meters (118 inches).