User Guide

Machine’s basic settings | 33
Machine’s basic settings
You change the machine’s setting set in the machine from HP Embedded Web Server. If
your machine is connected to the network, you can set the machine’s setting from HP
Embedded Web Server > Settings tab > Machine Settings (see "Using HP Embedded Web
Server" on page 58).
Machine’s default settings
After installation is complete, you may want to set the machine's default settings.
To change the machine’s default settings, follow these steps:
It may be necessary to press OK to navigate to lower-level menus for some models.
1 Select (Menu) button on the control panel.
2 Press System Setup > Machine Setup.
3 Select the option you want, then press OK.
4 Select the sub option you want, then press OK.
5 Press OK to save the selection.
6 Press (Cancel) to return to ready mode.