User Guide

Wired network setup | 49
IPv6 configuration
You can also set the TCP/IPv6 from HP Embedded Web Server. When the HP Embedded
Web Server window opens, move the mouse cursor over the Settings of the top menu bar
and then click Network Settings ("Settings tab" on page 59).
IPv6 is supported properly only in Windows Vista or higher.
The machine supports the following IPv6 addresses for network printing and managements.
• Link-local Address: Self-configured local IPv6 address (Address starts with FE80).
• Stateless Address: Automatically configured IPv6 address by a network router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
In the IPv6 network environment, follow the next procedure to use the IPv6 address.
Activating IPv6
1 Press the (Menu) button on the control panel.
2 Press Network > TCP/IP (IPv6) > IPv6 Protocol
3 Select On and press OK.
4 Turn the machine off and turn it on again.
DHCPv6 address configuration
If you have a DHCPv6 server on your network, you can set one of the following options for default
dynamic host configuration.
1 Press the (Menu) button on the control panel.
2 Press Network > TCP/IP (IPv6) > DHCPv6 Config
3 Press OK to select the required value you want.