User Guide

Wireless network setup | 54
Access point without a USB cable
Items to prepare
• Wi-Fi-enabled PC running Windows 7 or higher and an access point (router)
• You need to download software packages from the HP website to install the printer software.
For HP's all-inclusive help for the printer, go to www.hp.com/support/laser130MFP
.
• A machine installed with a wireless network interface
While setting the wireless network, the machine uses PC's wireless LAN. You might not be
able to connect to the Internet.
1 Turn on your computer, access point, and machine.
2 Download printer driver software from the HP website
(www.hp.com/support/laser130MFP
).
3 Unzip the driver package and run the driver installer.
4 Review and accept the installation agreements in the installation window. Then, click Next.
5 Select Wireless on the Printer Connection Type screen. Then, click Next.
6 On the Are you setting up your printer for the first time? screen, select Yes, I will set up my
printer's wireless network. Then, click Next.
If your printer is already connected on the network, select No, my printer is already
connected to my network.
7 Select Using a direct wireless connection on the Select the Wireless Setup Method screen.
Then, click Next.
8 When the wireless network set up is completed, click Next.
9 Follow the instructions in the installation window.
Using a network cable
See your network administrator, or the person that set up your wireless network, for
information about your network configuration.