User Guide

Wireless network setup | 55
Your machine is a network compatible machine. To enable your machine to work with your
network, you will need to perform some configuration procedures.
Items to prepare
• Access point
• Network-connected computer
• You need to download software packages from the HP website to install the printer software.
For HP's all-inclusive help for the printer, go to www.hp.com/support/laser130MFP
.
• A machine installed with a wireless network interface
• Network cable
Printing a network configuration report
You can identify the network settings of your machine by printing a network configuration report.
See "Printing a network configuration report" on page 48.
Configuring the machine’s wireless network
Before starting you will need to know the network name (SSID) of your wireless network and the
network key if it is encrypted. This information was set when the access point (or wireless router)
was installed. If you do not know about your wireless environment, please ask the person who set
up your network.
To configure wireless parameters, you can use HP Embedded Web Server.
Using HP Embedded Web Server
Before starting wireless parameter configuration, check the cable connection status.
1 Check whether or not the network cable is connected to the machine. If not, connect the
machine with a standard network cable.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine’s
new IP address in the browser window.
For example,
3 Click Login on the upper right of the HP Embedded Web Server website.
4 If it’s your first time logging into HP Embedded Web Server you need to log-in as an
administrator. Type in default ID (admin). Default password is none. We recommend you to
set the default password for security reasons. You can change your ID and password from
Security > System Security > System Administrator.
5 When the HP Embedded Web Server window opens, click Network Settings.
6 Click Wi-Fi > Wizard.