User Guide

Scanning to WSD | 87
Scanning to WSD
Scans the originals and saves the scanned data on a connected computer if the computer
supports the WSD (Web Service for Device) feature. To use the WSD feature, you need to install
the WSD printer driver on your computer. For Windows 7, you can install the WSD driver by
Control Panel > Devices and Printers > Add a printer. Click Add a network printer from the
wizard.
• The machine that does not support the network interface, it will not be able to use this
feature (see "Features by model" on page 8).
• The WSD feature works only with Windows Vista® or later version that are the
WSD-compliant computer.
• The following installation steps are based on Windows 7 computer.
Installing a WSD Printer Driver
1 Select Start > Control Panel > Devices and Printers > Add a printer.
2 Click Add a network, wireless or Bluetooth printer from the wizard.
3 In the printers list, select the one you want to use, and then click Next.
• The IP address for WSD printer is http://IP address/ws/ (example:
http://111.111.111.111/ws/).
• If no WSD printer is displayed in the list, click The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname and select Web Services Device
from Device type. Then enter the printer's IP address.
4 Follow the instructions in the installation window.
Scanning using the WSD feature
1 Make sure that the machine is connected to your computer and powered on.
2 Place a single document face down on the document glass, or load the documents face up
into the document feeder (see "Loading originals" on page 44).