User Guide

Sending a fax | 91
Sending a fax
When you place the originals, you can use either the document feeder or the scanner
glass. If the originals are placed on both the document feeder and the scanner glass, the
machine will read the originals on the document feeder first, which has higher priority in
scanning.
1 Place a single document face down on the document glass, or load the documents face up
into the document feeder (see "Loading originals" on page 44).
2 Select (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs (see "Adjusting the document
settings" on page 103).
4 Enter the destination fax number (see "Keypad letters and numbers" on page 34).
5 Press (Start) on the control panel. The machine starts to scan and send the fax to the
destinations.
• If you want to send a fax directly from your computer, use HP LJ Network PC Fax (see
"Sending a fax from your computer" on page 92).
• When you want to cancel a fax job, press (Cancel) before the machine starts
transmission.
•
If you used the scanner glass, the machine shows the message asking to place another page.