User Guide

Sending a fax | 95
Redialing the fax number
1 Press (Redial/Pause) button on the control panel.
2 Select the fax number you want.
Ten recently sent fax numbers with ten received Caller IDs are shown.
3 When an original is loaded in the document feeder, the machine automatically begins to
send.
If an original is placed on the scanner glass, select Yes to add another page. Load another
original and press OK. When you have finished, select No when Another Page? appears.
Confirming a transmission
When the last page of your original has been sent successfully, the machine beeps and returns to
ready mode.
When something goes wrong while sending your fax, an error message appears on the display. If
you receive an error message, press (Cancel) to clear the message and try to send the fax
again.
You can set your machine to print a confirmation report automatically each time sending
a fax is completed. Press (fax) > (Menu) > Fax Setup > Sending > Fax Confirm. on
the control panel.
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not be present.
You cannot send a color fax using this feature.
1 Place a single document face down on the document glass, or load the documents face up
into the document feeder.
2 Press (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs.
4 Press (Menu) > Fax Feature > Delay Send on the control panel.