Getting Started HP Notebook PC Document Part Number: 433664-001 October 2006 This guide explains how to set up your hardware and software, and begin using the computer in Windows®.
© Copyright 2006 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Contents 1 First-time setup Identifying required hardware . . . . . . . . . . . . . . . . . . . . . Setting up the computer . . . . . . . . . . . . . . . . . . . . . . . . . . Step 1: Insert the battery . . . . . . . . . . . . . . . . . . . . . . Step 2: Connect the computer to external power. . . . Step 3: Turn on the computer . . . . . . . . . . . . . . . . . . Step 4: Set up the software . . . . . . . . . . . . . . . . . . . . Step 5: Create recovery discs (recommended) . . . . .
Contents Installing additional hardware and software . . . . . . . . . . Identifying and installing hardware . . . . . . . . . . . . . . Locating and installing software . . . . . . . . . . . . . . . . Updating the software installed on the computer. . . . . . . Finding the user guides . . . . . . . . . . . . . . . . . . . . . . . . . . Turning off the computer correctly . . . . . . . . . . . . . . . . . 3–6 3–6 3–6 3–7 3–8 3–8 4 Troubleshooting Troubleshooting resources . . . . . . . . . . . . . . . . .
Contents Recovering the system . . . . . . . . . . . . . . . . . . . . . . . . . . . B–5 Creating recovery discs (highly recommended) . . . . B–6 Performing a recovery . . . . . . . . . . . . . . . . . . . . . . . . B–8 C Specifications Operating environment. . . . . . . . . . . . . . . . . . . . . . . . . . . C–1 Rated input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 First-time setup Identifying required hardware To set up the computer for the first time, you will need the computer, the AC adapter, the power cord, and the primary battery. included with the computer may vary by region ✎ Components and by model.
First-time setup Component 1 Power cord 2 AC adapter 3 Primary battery only the AC adapter provided with the computer or one ✎ Use approved for this computer.
First-time setup Setting up the computer Computer setup involves the following tasks: 1. Inserting the battery into the computer. 2. Connecting the computer to external power ✎ The battery begins to charge. 3. Turning on the computer. 4. Setting up the software. 5. Creating recovery discs (recommended) to Appendix B, “Backup and recovery,” for ✎ Refer instructions.
First-time setup Step 1: Insert the battery To insert a primary battery: 1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery 1 into the battery bay until it is seated. The battery release latches 2 automatically lock the battery into place.
First-time setup Step 2: Connect the computer to external power cords and AC outlets vary in appearance by region and ✎ Power country. To connect the computer to external AC power: 1. Plug the AC adapter into the power connector 1 on the computer. 2. Plug the power cord into the AC adapter 2. 3. Plug the other end of the power cord into an AC outlet 3.
First-time setup When the computer receives AC power, the battery begins to charge and the battery light (on the front of the computer) turns on. When the battery is fully charged, the battery light turns off. Leave the computer connected to external power until the battery is fully charged and the battery light turns off. partially charged new battery can run the computer after ✎ Asoftware setup is complete, but battery charge displays will not be accurate until the new battery has been fully charged.
First-time setup To turn on the computer: » Press the power button 1. The power light on power button 2 turns on, and you are prompted to begin software setup.
First-time setup Step 4: Set up the software After the computer is turned on, it will go through software setup. Follow the on-screen instructions to set up the software. Note the following points: ■ After you respond to the setup prompt, you must complete the entire setup process without interruption. Setup time varies. ■ During software setup, the computer may pause periodically for several minutes. These normal pauses are indicated by an hourglass icon.
2 Quick tour Identifying required hardware included with the computer may vary by region ✎ Components and model. The illustrations in this chapter identify the standard features included on most computer models.
Quick tour Top components Component 1 TouchPad 4 Power button 2 Wireless light (select models only) 5 Power light 3 Wireless button (select models only) 2–2 Getting Started
Quick tour Front components Component 1 Battery light 2 Audio-out (headphone) jack Getting Started 3 Audio-in (microphone) jack 2–3
Quick tour Left components Component 1 RJ-11 (modem) jack (select models only) 4 External monitor port 2 RJ-45 (network) jack 5 USB ports (2) 3 Power connector 6 PC Card slot 2 Security cable slot Right components Component 1 2–4 Optical drive Getting Started
3 Next steps Protecting the computer The information in this section explains how your computer can be protected from damage caused by a virus, a security breach, a power surge, unsafe operation, or system failure. Protecting the computer from viruses When you use the computer for e-mail, network, or Internet access, you expose it to computer viruses that can disable the operating system, applications, or utilities or cause them to function abnormally.
Next steps Protecting your system files The HP Backup and Recovery Manager provides several ways to back up the system and to recover optimal system functionality. Refer to Appendix B, “Backup and recovery,” for additional information. Protecting your privacy When you use the computer for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you or the computer.
Next steps Using the computer safely Å WARNING: To reduce the risk of electric shock or damage to your equipment, observe these practices: ■ Plug the power cord into an AC outlet that is easily accessible at all times. ■ Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). ■ If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet.
Next steps Å WARNING: To avoid potential discomfort or burns, do not block the air vents or place the computer on your lap for extended periods. Also, do not allow the AC adapter to contact the skin for extended periods during operation. The computer is designed to run demanding applications at full power. As a result of increased power consumption, it is normal for the computer and the AC adapter to feel warm or hot when used continuously.
Next steps Connecting to a computer network The computer may have the following networking capabilities: ■ Local area network (LAN) ■ Wireless local area network (WLAN) ■ Wireless wide area network (WWAN) ■ Bluetooth® If you plan to connect the computer to a home office LAN or WLAN, refer to the Help and Support Center for information on networking. If you need assistance to connect to a company LAN or WLAN, contact your network administrator.
Next steps Installing additional hardware and software Identifying and installing hardware To see a list of hardware installed on the computer, follow these steps: 1. Select Start > My Computer. 2. In the left pane of the System Tasks window, click View system information. 3. Select Hardware tab > Device Manager. can modify your device configurations using Device ✎ You Manager.
Next steps 2. When the installation wizard opens, follow the on-screen instructions. 3. Restart the computer if prompted to do so. ■ Preloaded software. This is software provided on the hard drive but not ready to use. To locate or install preloaded software or drivers: 1. Select Start > All Programs > Software Setup. 2. Follow the on-screen instructions and select the check box next to the software program or driver you want to install.
Next steps Finding the user guides User guides, regulatory and safety notices, and other information resources about using the computer are available through the Help and Support Center. To access the user guides: » Select Start > Help and Support > User Guides. Turning off the computer correctly Whenever possible, turn off the computer by using the standard shutdown procedure: 1. Save your work and close all open applications. 2.
4 Troubleshooting Troubleshooting resources If you experience computer problems, perform the following troubleshooting steps: 1. Refer to “Quick troubleshooting,” the next section in this chapter. 2. Access additional information about the computer and Web site links through the Help and Support Center. Select Start > Help and Support. many checkup and repair tools require an Internet ✎ Although connection, other tools can help you fix a problem when the computer is offline. 3.
Troubleshooting Quick troubleshooting The computer is unable to start up To turn on the computer, press the power button. When the computer is turned on, the power light turns on. If the computer and the power light are not turned on when you press the power button, adequate power may not be available to the computer.
Troubleshooting The computer screen is blank If the computer is on but the screen is blank, the computer may be in standby or hibernation, may not be set to display the image on the computer screen, or the display switch may not be functioning properly. Try the following suggestions to resolve the issue: ■ To resume from standby or restore from hibernation, briefly press the power button. Standby and hibernation are energy-saving features that can turn off the display.
Troubleshooting Software is functioning abnormally Follow these suggestions if the software becomes unresponsive or responds abnormally: ■ Restart the computer: ❏ In Windows XP Home, select Start > Turn Off Computer > Restart. ❏ In Windows XP Professional, select Start > Turn Off Computer > Restart > OK. (If you have been registered to a domain, the button you click will be called Shut Down instead of Turn Off Computer.
Troubleshooting If you are unable to shut down the computer with these procedures, try the following emergency procedures in the sequence provided: Ä CAUTION: Emergency shutdown procedures result in the loss of unsaved information. 1. Press ctrl+alt+delete. Then, select Shut Down > Turn Off. 2. Press and hold the power button for at least 5 seconds. 3. Disconnect the computer from external power and remove the battery.
Troubleshooting An external device is not working Follow these suggestions if an external device does not function as expected: ■ Turn on the device as instructed in the device user guide. Some devices may not be powered by the computer, and must be turned on before the computer is turned on. ■ Be sure that all device connections are secure. ■ Be sure that the device is receiving electrical power. ■ Be sure that the device, especially if it is an older one, is compatible with your operating system.
Troubleshooting ■ Be sure that the wireless router (access point) is properly connected to its power adapter and the cable modem, and the lights are on. ■ Disconnect and then reconnect all cables, and turn the power off and then back on. information on setting up a home wireless network ✎ For connection, visit http://www.hp.com/go/techcenter/wireless (English only). information on connecting to a WWAN, refer to the ✎ For HP Broadband Wireless Getting Started document, included with the computer.
Troubleshooting Contacting Customer Care If you are unable to find the help you need by using the Help and Support Center, you may need to contact Customer Care. For the fastest possible resolution of your problem, have the computer and the following information available when you call or e-mail: ■ Product name located on the display or keyboard. ■ Serial number (s/n) listed on the service tag. ❏ The service tag label is on the bottom of the computer.
A Connect to the Internet from your home The computer includes hardware and software that allows you to connect to the Internet. Before you can access the Internet, choose an Internet Service Provider (ISP) and choose the type of Internet connection you want, such as broadband, wireless, or dial-up. Then connect the hardware. hardware and software features vary depending on the ✎ Internet computer model and your location.
Connect to the Internet from your home Using the New Connection Wizard The New Connection Wizard works for these types of connections: ■ You already have an account with an ISP. ■ You have a disc from an ISP. ■ You do not have an Internet account and would like to select an ISP from the list provided within the wizard. ■ You have selected an unlisted ISP and the ISP has provided you with such information as a specific IP address and POP3 and SMTP settings.
Connect to the Internet from your home ■ Wireless—For high-speed mobile Internet access, you can use a wireless connection. A wireless network set up at home requires a wireless router (purchased separately). To learn about setting up wireless access, visit http://www.hp.com/go/techcenter/wireless (English only). To learn about connecting to a WWAN, refer to the HP Broadband Wireless Getting Started document, included with the computer.
B Backup and recovery HP Backup and Recovery Manager provides several ways to back up the system and to recover optimal system functionality. installed drivers, utilities, and applications can be copied ✎ HP to a CD or to a DVD using the HP Backup and Recovery Manager. DVD±RW discs and DVD±RW double-layer discs ✎ Formatted are not compatible with HP Backup and Recovery Manager. computer must be connected to external power before you ✎ The perform backup and recovery procedures.
Backup and recovery ■ Back up modifications since your last backup, using HP system recovery points ■ Schedule backups Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive, or to discs. process will take several minutes, depending on the file ✎ This size and the speed of the computer. To back up specific files or folders: 1.
Backup and recovery Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows operating system, software applications, and all personal files and folders. of the entire hard drive image can be stored on another ✎ Ahardcopydrive, on a network drive, or on recovery discs that you create. process may take over an hour, depending on your ✎ This computer speed and the amount of data being stored.
Backup and recovery Backing up modifications made to the system When you back up modifications since your last backup, you are creating system recovery points. This allows you to save a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system. first system recovery point, a snapshot of the entire image, ✎ The is automatically created the first time you perform a backup.
Backup and recovery Scheduling backups To schedule backups: 1. Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler. The “Backup Scheduler” page opens. 2. Click Next. 3. Schedule system recovery points at specific intervals (now, daily, weekly, or monthly) or at specific events, such as at system start or when you dock to an optional docking station (select models only), by clicking one of the available options. Click Next to further define the settings.
Backup and recovery The HP Backup and Recovery Manager performs these tasks: ■ Creating recovery discs (highly recommended)—The recovery discs are used to start up your computer and to recover the full factory image (operating system and software) in case of system failure or instability. you do not have a CD or DVD burner, a copy of the ✎ Ifentire hard drive image can be stored on another hard drive or on a network drive.
Backup and recovery Before creating recovery discs: ■ Obtain high-quality CD-R, DVD-R, or DVD+R media, purchased separately. DVD±RW and DVD±RW double-layer discs ✎ Formatted are not compatible with the HP Backup and Recovery Manager. ■ Number each disc before inserting it into the optical drive of the computer. ■ If necessary, you can cancel Recovery Media Creator before you have finished creating the recovery discs.
Backup and recovery Performing a recovery Performing a recovery from the recovery discs Follow these steps to perform a recovery from the recovery discs: 1. Back up all personal files. 2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions.
Backup and recovery Initiating a recovery from the hard drive recovery partition To initiate a recovery from the hard drive recovery partition, follow these steps: 1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click a recovery option, and then click Next. 4. Follow the on-screen instructions.
C Specifications Operating environment The operating environment information in the following table may be helpful if you plan to use or transport the computer in extreme environments. Factor Metric U.S. Operating (not writing to optical disc) 0°C to 35°C 32°F to 95°F Operating (writing to optical disc) 5°C to 35°C 41°F to 95°F Nonoperating -20°C to 60°C -4°F to 140°F Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95% Operating (14.7 to 10.
Specifications Rated input power The power information in this section may be helpful if you plan to travel internationally with the computer. The computer operates on DC power, which can be supplied by an AC or a DC power source. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer.
Index A AC adapter connecting 1–5 identifying 1–2 altitude specifications C–1 antivirus software 4–4 audio-in (microphone) jack 2–3 audio-out (headphone) jack 2–3 B battery charging 1–6 indentifying 1–2, 2–3 inserting 1–4 battery light 1–6, 2–3 Bluetooth 3–5 buttons power 1–7, 2–2 wireless 2–2 C cables and cords, power 4–2 computer turn off 3–8 turn on 1–6 computer viruses 4–4 Getting Started connecting the computer to external power 1–5 connecting to a computer network 3–5 Customer Care 4–8 D data, sa
Index I N IEC 60950 compliance 3–4 image, switching among display devices 4–3 inserting the battery 1–4 Internet access A–2 network jack 2–4 network, connecting computer to 3–5 New Connection Wizard A–2 J operating environment specifications C–1 operating system, version number 4–8 optical drive 2–4 overheating, computer 3–4, 4–5 jacks audio-in (headphone) jack 2–3 audio-out (microphone) 2–3 RJ-11 (modem) jack 2–4 RJ-45 (network) jack 2–4 L labels, service tag 4–8 LAN (local area network) 3–5 lights
Index R rated input power specifications C–2 registration number, operating system 4–8 regulatory information notices 3–4 Regulatory, Safety and Environmental Notices 3–4 RJ-11 (modem) jack 2–4 RJ-45 (network) jack 2–4 S Safety and Comfort Guide 3–3 serial number, computer 4–8 service tag 4–8 seurity cable slot 2–4 software antivirus 3–1 setup 1–8 updates 3–7 specifications operating environment C–1 rated input power C–2 standby 4–3 T temperature safety considerations 3–4 specifications C–1 troubleshooti
