HP Engage Go 10 Mobile System - BIOS Simulator

Security
HP Computer Setup
Item Specic Help
1. Create BIOS Administrator Password
The Administrator password controls access
to the following features:
• Setup Menu (F10)
• 3rd Party Option ROM Management (F3)
• Update System ROM
• WMI Commands that change system
settings
• BIOS Conguration Utility (BCU)
• Alternative Power-On Password
2. Physical Presence Interface
When this feature is set to “Enable”, then
the user is notied on system power up
when changes are made to system security
policy, and the user must manually agree
to those changes before the change is con-
rmed
Fingerprint Reset on Reboot
Physical Presence Interface
Trusted Execution Technology (TXT)
Absolute® Persistence Module Current State
Activation Status : Inactive
Absolute® Persistence Module Permanent Disable : No
System Management Command
Administrator Tools
Security Conguration
Utilities
1
2
Main
Advanced
UEFI Drivers
 Create BIOS Administrator Password
 TPM Embedded Security
 Create POST Power-On Password
 Password Policies
 Administrator Authentication Policies
 BIOS Sure Start
 Secure Platform Management (SPM)
 Hard Drive Utilities
 Restore Security Settings to Factory Defaults
 Secure Boot Conguration