HP Engage Go 10 Mobile System - BIOS Simulator

Security
HP Computer Setup
Item Specic Help
1. Sure Start BIOS Settings Protection
When enabled, HP Sure Start will lock all critical BIOS settings and provide
enhanced protection for these settings via the HP Sure Start non-volatile (ash)
memory
- The BIOS administrator credentials must be set to enable this setting
- See HP Sure Start documentation for
details on which BIOS settings are
protected
2. Enhanced HP Firmware Runtime Intrusion Prevention and Detection
Enables monitoring of HP system rmware executing out of main memory while the
user Operating System is
running.
Any anomalies detected in HP System rmware that is active while the user operat-
ing system is running will result in a Sure Start Security Event being generated.
Click on the eld to see the options.
3. Sure Start Security Event Policy
This setting controls HP Sure Start behavior upon identifying a critical security
event (any modication to HP rmware) during OS runtime.
- Log event only - HP Sure Start will log all critical security events m the HP Sure
Start Audit log within the HP Sure Start non-volatile (ash) memory
- Log Event and notify user: In addition to logging all critical security events. HP
Sure Start will notify the user within thr operating system that a critical event has
occurred
- Log Event and power o system: In addition to logging all critical events. HP Sure
Start will power o the system upon detecting a HP Sure Start Security Event. Due
to the potential for data loss, use of this setting is only recommended in situations
where security integrity of the system is a higher priority than the risk of potential
data loss
Verify Boot Block on every boot
Dynamic Runtime Scanning of Boot Block
Sure Start BIOS Settings Protection
Sure Start Secure Boot Keys Protection
Enhanced HP Firmware Runtime Intrusion Prevention and Detection
Sure Start Security Even Policy
Sure Start Security Event Boot Notication
BIOS Sure Start
1
2
3
Main
Advanced
UEFI Drivers

Log Event Only
Log Event and notify userLog Event and power off system
Time out after 15 seconds
Require Acknowledgment