QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Overview HP ProLiant BL685c G7 Server Blade 1. Internal USB connector/ 5. System power button and LED Internal MicroSD card slot 2. Three (3) mezzanine I/O expansion slots 6. Local I/O Connector 3. Thirty-two (32) PC3-8500 DDR3 Registered DIMMs or PC3- 7.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Overview 4. Up to four (4) Multi-Core AMD Opteron™ 6100 Series processors 8. Two (2) small form factor (SFF) hot plug drive bays What's New Support for AMD Opteron™ 6200 Series Processors Support for 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard Drive Support for HP NC525m 10Gb 2-port FlexFabric Server Adapter Support for DDR3-1600 (PC3-12800R) Registered 4GB and 8GB Single Rank Memory.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Overview Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives Network Controller: Controller Two (2) integrated NC551i Dual Port FlexFabric 10Gb Converged Network Adapters supporting stateless TCP/IP offload, TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI protocols NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Overview latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page Enclosures: Enclosures HP offers two (2) different c-Class server blade enclosures to meet your individual needs: The HP BladeSystem c7000 rack enclosure is 10U high and holds up to eight (8) ProLiant BL685c G7 servers plugged vertically.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor Sixteen-Core Processors One of the following AMD Opteron™ 6276 (2.30GHz/16-core/16MB/115W) Processor depending on Model AMD Opteron™ 6274 (2.20GHz/16-core/16MB/115W) Processor AMD Opteron™ 6272 (2.10GHz/16-core/16MB/115W) Processor Low Power AMD Opteron™ 6262HE (1.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features Memory Type DDR3 Registered (RDIMM) Standard 32GB (8 x 4GB) (depending on model) Standard 64GB (16 x 4GB) (depending on model) Maximum (RDIMM) 1TB (32 x 32GB) at 1066 MHz or at 800 MHz NOTE: Each processor memory bus will operate at up to 1333 MHz with either one quad-rank (QR) or two single-rank/dual-rank (SR/DR) DIMMs per processor memory channel and 1066 MHz with up to two QR or one QR and one SR/DR DIMMs per processor memo
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features Storage Controller HP Smart Array P410i 1GB memory module with flash backed write cache (FWBC). Supports RAID Controller 0,1. NOTE: The HP Smart Array P410i controller is required for all blades that support hot plug drives. See Factory Integrated Models section for more information.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features Optimal performance utilizing PCI Express 4/2/1Gb/s auto negotiating speeds (4Gb HBAs) 8/4/2Gb/s auto negotiation speeds (8Gb HBAs) Dual-ports for redundant path connections Up to two FC HBAs per server blade providing redundant FC HBA support Optimized for HP Storage products and supported by third party SAN vendors Support for Microsoft® Windows®, Linux, VMware ESX and Citrix XenServer™ operating system environments Compatib
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features enclosures, and all components and options supported by HP ProLiant Support Packs for Windows and Linux version 8.70. Additionally, VMware offline firmware updates will be included. HP Insight Foundation More information can be found at this link for HP Service Pack for ProLiant: www.hp.com/go/server/service_packs Insight Foundation is being baselined at version v8.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features optimizing and protecting complex infrastructure in minutes. It's a powerful toolkit, integrated-by-design, that accelerates complex technology projects and simplifies daily operations, transforming data center economics. With Insight Dynamics IT professionals can plan capacity and power continuously, balance workloads across physical and virtual resources, and ensure costeffective high availability.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features Operating Systems and Virtualization Software Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Solaris VMware Citrix XenServer NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, including how to purchase from HP, please visit our OS Support Site at: http://www
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Standard Features Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to Module authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Service and Support Standard Care Package Package that maintains high level of server availability HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Service and Support Basic Care Package Delivers minimum recommended support service level HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Models Sixteen-Core Models HP ProLiant BL685c G7 6276 4P 64GB-R Hot Plug SFF Server 654799-B21 Processor(s) Cache Memory Memory Network Adapter Storage Controller Hard Drives Internal Storage One of the following depending on Model Optical Drive Form Factor (4) AMD Opteron™ 6276 (2.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Models Eight-Core Models HP ProLiant BL685c G7 6136 4P 32GB-R P410i/1GB FBWC Hot Plug 2 SFF Server 518873-B21 Processor(s) Cache Memory One of the following depending on model Memory Network Adapter Storage Controller Hard Drives Internal Storage One of the following depending on Model Optical Drive Form Factor DA - 13655 (4) AMD Opteron™ 6136 (2.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Configuration Information - Factory Integrated Models HP Memory HP BL685c G7 AMD Opteron™ 6212 (2.60GHz/8-core/16MB/115W) FIO Processor Kit HP BL685c G7 AMD Opteron™ 6140 (2.6GHz/8-core/12MB/115W) 2-processor FIO Kit HP BL685c G7 AMD Opteron™ 6132HE (2.2GHz/8-core/12MB/85W) 2-processor FIO Kit HP BL685c G7 AMD Opteron™ 6136 (2.4GHz/8-core/12MB/115W) FIO 2processor Kit HP BL685c G7 AMD Opteron™ 6128HE (2.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Configuration Information - Factory Integrated Models Step 3: Choose Additional Options for Factory Integration HP Storage Controller HP Smart Array P410i/1G FBWC 2-ports Int PCIe x8 SAS Controller 588184-B22 NOTE: Includes 1 GB cache with flash-backed write cache (FBWC). NOTE: The Smart Array P410i controller is required for all blades that support hot plug drives.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Core Options HP Fibre Channel Mezzanine Options HP Processors 4Gb Fibre Channel Mezzanines Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem 8Gb Fibre Channel Mezzanines Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem HP BLc Brocade 804 8Gb Fibre Ch
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Core Options NOTE: The ProLiant BL685c G7 only supports two (2) and four (4) processor configurations.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Core Options HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard Drive HP 300GB 6G SAS 10K rpm SFF (2.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Core Options HP 100GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid State Drive HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13415_na/13415_na.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Additional Options NOTE: For additional license kits, including electronic delivery options, please see the HP Integrated Lights-Out (iLO) QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Additional Options HP Security - TPM HP Trusted Platform Module Option NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Additional Options HP Ultrium Tape Blades HP LTO-4 SB1760c Tape Blade NOTE: LTO-4 Ultrium tape technology NOTE: Please see the QuickSpecs for Technical Specifications and additional configuration information at: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DDR3 Memory Population Guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz If you install 1x 1066MHz DIMM in channel 1 and 7x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, the maximum speed will be 1066MHz References
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory HP ProLiant BL685 G7 Server Blade DIMM slot and configuration diagrams Basic memory slot and population diagram Population order; start with "A" first, "B" second, "C" third, etc.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory Chnl 1 slot # 1 2 CPU1 population order A: 4GB DIMM E: empty slot # 1 2 CPU2 population order A: 4GB DIMM E: empty Chnl 1 Chnl 2 3 4 C: empty G: empty 3 4 C: empty G: empty Chnl 2 Chnl 3 5 6 B: 4GB DIMM F: empty 5 6 B: 4GB DIMM F: empty Chnl 3 Chnl 4 7 8 D: empty H: empty 7 8 D: empty H: empty Chnl 4 Chnl 1 slot # 1 2 CPU3 population order A: 4GB DIMM E: empty slot # 1 2 CPU4 population order A: 4GB DIMM E: em
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory Chnl 1 1 2 A: 4GB DIMM E: empty 1 2 A: 4GB DIMM E: empty Chnl 1 Chnl 2 3 4 C: 4GB DIMM G: empty 3 4 C: 4GB DIMM G: empty Chnl 2 Chnl 3 5 6 B: 4GB DIMM F: empty 5 6 B: 4GB DIMM F: empty Chnl 3 Chnl 4 7 8 D: 4GB DIMM H: empty 7 8 D: 4GB DIMM H: empty Chnl 4 Standard Memory Plus Optional Memory (4 CPU model) 416GB, consisting of two (2) 4GB RDIMMs plus six (6) 16GB RDIMMs 8 x 4GB single-rank PC3-10600 RDIMMs 24 x 16GB
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory Standard Memory Plus Optional Memory (4 CPU model) 320GB, consisting of two (2) 4GB RDIMMs plus six (6) 16GB RDIMMs 16 x 4GB single-rank PC3-10600 RDIMMs 16 x 16GB quad-rank PC3-8500 RDIMMs Chnl 1 slot # 1 2 CPU1 population order A: 4GB DIMM E: 16GB DIMM slot # 1 2 CPU2 population order A: 4GB DIMM E: 16GB DIMM Chnl 1 Chnl 2 3 4 C: 4GB DIMM G: 16GB DIMM 3 4 C: 4GB DIMM G: 16GB DIMM Chnl 2 Chnl 3 5 6 B: 4GB DIMM F: 16GB DIMM
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory Chnl 1 slot # 1 2 CPU1 population order A: 32GB DIMM E: 32GB DIMM slot # 1 2 CPU2 population order A: 32GB DIMM E: 32GB DIMM Chnl 1 Chnl 2 3 4 C: 32GB DIMM G: 32GB DIMM 3 4 C: 32GB DIMM G: 32GB DIMM Chnl 2 Chnl 3 5 6 B: 32GB DIMM F: 32GB DIMM 5 6 B: 32GB DIMM F: 32GB DIMM Chnl 3 Chnl 4 7 8 D: 32GB DIMM H: 32GB DIMM 7 8 D: 32GB DIMM H: 32GB DIMM Chnl 4 Chnl 1 slot # 1 2 CPU3 population order A: 32GB DIMM E: 32GB
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Memory HP Memory Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-12800 (DDR-1600) Registered CAS-11 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit HP 8GB (1x8GB) Single Rank x4 PC3-12800 (DDR-1600) Registered CAS-11 Memory
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Storage 1-2 2 x SFF SAS or SATA Hot Plug Hard Drives, or 2 x SFF SATA Hot Plug SSD Drives Hard Drives NOTE: The components of a storage subsystem (e.g.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Storage 800GB 6G SAS MLC SFF SSD 400GB 6G SAS MLC SFF SSD 200GB 6G SAS MLC SFF SSD 2 1-2 SATA Hot Plug 2.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Technical Specifications System Unit Dimensions (H x W x D) Weight (approximate) 14.42 x 2.19 x 20.058 (36.63 x 2.19 x 50.95 cm) Power Specifications Maximum 27 lbs (12.25 kg) (all hard drives, DIMMs, and processors installed) Minimum 19.2 lbs (8.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Technical Specifications Acoustic Noise For acoustic noise specifications, please see the HP BladeSystem c-Class Enclosures QuickSpecs located at: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/ 12790_na.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/ 12810_na.
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Technical Specifications HP Integrated Lights-Out Architecture 3 (iLO 3) Processor integrated on system Upgradeability board Video Support Interfaces Memory Operating System Support PCI Express based health and remote management ASIC PCI Express RISC processor core running at 250MHz Option firmware upgradeable via Flash ROM 1600 x 1200 DVR max resolution One Ethernet network connection (10/100Mb/s) 128-MB DDR with ECC Microsoft Windows 2008 R2
QuickSpecs HP ProLiant BL685c Generation 7 (G7) Server Blade Technical Specifications Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.