QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Overview 1. 2. 3. 4. 5. Access panel Internal USB connector Internal SD card slot Two (2) mezzanine I/O expansion slots Graphics controller chip HP ProLiant BL280c G6 Server Blade 6. Processor socket 2 (with blank) 7. Processor socket 1 (populated) 8. HP c-Class Blade SUV Cable connector 9. Twelve (12) PC3-10600 (DDR3) Registered or Unbuffered DIMM Memory Slots What's New Support for HP SATA Non-hot Plug 2.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Overview and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html HP BladeSystem c-Class Interconnect and Mezzanine Components: http://h18004.www1.hp.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Overview Form Factor: Factor HP ProLiant BL280c is a half-height server blade that plugs into the BladeSystem c3000 and c7000 enclosures 16 blades per c7000 (10u) enclosure 8 blades per c3000 (6U) enclosure Infrastructure Management: Management This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor Six-Core Processors One of the following Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor depending on Model Intel® Xeon® X5670 (2.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features Cache Memory One of the following depending on Model 4MBshared L3 cache 8MB shared L3 cache 12MB shared L3 cache Chipset Intel® 5500 chipset Memory Type Standard PC3-10600 (DDR3-1333) Registered or Unbuffered DIMMS 2GB (1 x 2GB) RDIMM 4GB (2 x 2GB) RDIMM 6GB (3 x 2GB) RDIMM Maximum Up to 192GB memory with Registered DIMMs Up to 48GB memory with Unbuffered DIMMs NOTE: Depending on the memory configuration and processor m
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features Integrated Manageability HP Integrated Lights-Out 2 (iLO 2) management processor Storage Controller HP Embedded SATA RAID Controller NOTE: This is a chip set SATA RAID controller. It supports RAID 0 and 1 only and no BBWC. User needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the RAID can be activated. Users also need to download the OS driver from the http://www.hp.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features Brocade, Emulex and QLogic Fibre Channel HBAs feature: Optimal performance utilizing PCI Express 4/2/1Gb/s auto negotiating speeds (4 Gb HBAs) 8/4/2Gb/s auto negotiating speeds (8 Gb HBAs) Dual-ports for redundant path connections Up to two FC HBAs per server blade providing redundant FC HBA support Optimized for HP Storage products and supported by third party SAN vendors Support for Microsoft® Windows® and Linux operating sys
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features customers the flexibility to set their own specific baseline. The Service Pack for ProLiant has been rigorously tested with specific attention for interaction between firmware, drivers and agents both within the server as well as in interaction with the BladeSystem enclosure components (Onboard Administrator and Virtual Connect).
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features www.hp.com/go/insightcontrol HP Insight Dynamics for ProLiant HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported option to HP Insight CMU, for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform LSF workload scheduler and Platform Application Center, as well as the HP-MPI parallelization library.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Standard Features Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to Module authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Service and Support Standard Care Package Package that maintains high level of server availability HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Service and Support Basic Care Package Delivers minimum recommended support service level HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Models Models NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: The models below support Intel® Xeon® 5600 or 5500 series processors. (1) Intel® Xeon® Processor X5650 (2.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Configuration Information - Factory Integrated Models HP Memory HP BL280c G6 Intel® Xeon® L5630 (2.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Core Options NOTE: For additional Core Options and Additional Options please see options sections below.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Core Options HP Processors Six-Core Processor Option Kits HP BL280c G6 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) Processor Kit HP BL280c G6 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) Processor Kit HP BL280c G6 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) Processor Kit HP BL280c G6 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) Processor Kit HP BL280c G6 Intel® Xeon® X5660 (2.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Core Options HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP Memory Kit Unbuffered with ECC DIMMs (UDIMMs) HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 5
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Core Options HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive NOTE: SAS drives are only supported with the use of the HP Smart Array P712m Controller.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Additional Options HP Insight Software HP Insight Control HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server License HP Insight Software Media Kit NOTE: Insight Software DVD media without licenses. Contains Insight Control, Insight Dynamics and Virtual Connect Enterprise Manager.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Additional Options HP Integrated Lights-Out (iLO) Advanced for BladeSystem HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic License HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s).
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Additional Options NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/13485_na/13485_na.html HP Security - TPM HP Trusted Platform Module Option NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Additional Options HP c-Class Mezzanine Options HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class BladeSystem HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class BladeSystem NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/12586_na/12586_na.html HP Ultrium Tape Blades HP SB1760c Tape Blade NOTE: LTO-4 Ultrium technology.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Additional Options HP Care Pack Services NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Memory NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Memory Population Guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Memory 1333 1333* 1333* 1333* 2 DIMM Per Channel *Supported at 1333 via setting in ROM based setup utility (RBSU). **2DPC: LV runs at 1066, Std voltage runs at 1333 NOTES: 1066/ 1333** 800 800 1333* 1333* 1333* PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 10600MHz.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Memory Standard Memory Plus Optional Memory (1 CPU model) 82GB 1x 2GB dual-rank PC3-10600 RDIMMs 5x 16GB quad-rank PC3-10600 or PC3-8500 RDIMMs Chnl 1 slot # 1 2 CPU1 population order D: 2GB DIMM A: 16GB DIMM slot # 1 2 CPU2 population order D: empty A: empty Chnl 1 Chnl 2 3 4 E: 16GB DIMM B: 16GB DIMM 3 4 E: empty B: empty Chnl 2 Chnl 3 5 6 F: 16GB DIMM C: 16GB DIMM 5 6 F: empty C: empty Chnl 3 Standard Memory Replaced with O
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Memory Standard Memory Replaced with Optional Memory (2 CPU Model) RDIMM maximum configuration 192GB, consisting of twelve (12) 16GB quad-rank PC3-10600 RDIMMs Chnl 1 slot # 1 2 CPU1 population order D: 16GB DIMM A: 16GB DIMM slot # 1 2 CPU2 population order D: 16GB DIMM A: 16GB DIMM Chnl 1 Chnl 2 3 4 E: 16GB DIMM B: 16GB DIMM 3 4 E: 16GB DIMM B: 16GB DIMM Chnl 2 Chnl 3 5 6 F: 16GB DIMM C: 16GB DIMM 5 6 F: 16GB DIMM C: 16GB DIMM
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Memory HP Memory Following are memory options available from HP: Registered DIMMs (RDIMMs) HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit NOTE: Low Voltage DIMMs can on
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Storage 1-2 2 x SSF SAS/SATA/SSD Non-Hot Plug Hard Drives Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Storage External Storage Quantity Position Supported Host Controller or Adapter Supported Enterprise Virtual Array Please see the XP External Please see the XP Disk Array Systems Quick Specs for the latest list Systems Disk Array of supported HBAs Systems QuickSpecs below to determine configuration requirements HP Enterprise Virtual Array Family: http://h18006.www1.hp.com/products/quickspecs/12408_na/12408_na.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Technical Specifications System Unit Dimensions (H x W x D) (with bezel) Weight (approximate) Power Specifications 7.11 in x 2.03 in x 20.06 in (18.06 cm x 5.14 cm x 50.95 cm) Maximum 14.5 lb (6.58 kg) (all hard drives and processors installed) Minimum 9.4 lb (4.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Technical Specifications HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_na/ 12790_na.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_na/ 12810_na.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Technical Specifications Client System Support Client Browser Support Command Line Support Microsoft Windows XP Professional Edition Microsoft Windows Vista Business and Ultimate Editions Red Hat Enterprise Linux Desktop 5.00 SUSE Linux Enterprise Desktop 11 SUSE Linux Enterprise Desktop 10 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 Firefox 3.5 (on supported Windows and Linux systems) Firefox 3.
QuickSpecs HP ProLiant BL280c Generation 6 (G6) Server Blade Technical Specifications © Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
