HP EliteBook 830 G5 Notebook PC HP EliteBook 836 G5 Notebook PC Maintenance and Service Guide

Solid-state drive (SSD)
Description Spare part number
1 TB, PCIe, Gen3×4, NVMe, TLC L13728-001
512 GB, PCIe, Gen3×4, SS, NVMe, TLC L13727-001
512 GB, PCIe, Gen3×4, Self-encrypting drive (SED), Opal 2, TLC L13726-001
512 GB, SATA-3, FIPS-140-2, TLC L13725-001
360 GB, PCIe Gen3×4, NVMe,TLC L13724-001
256 GB, PCIe, Gen3x4, SS, NVMe, TLC L13721-001
256 GB, PCIe, NVMe, value L13722-001
256 GB, SATA-3, FIPS-140-2, TLC L50400-001
256 GB, SATA-3, Opal 2, TLC L13723-001
128 GB, SATA-3, TLC L13720-001
Before removing the solid-state drive, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 38).
5. Disconnect the battery cable from the system board (see Battery on page 40).
Remove the solid-state drive:
1. Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board.
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts