Maintenance and Service Guide

Storage device
1. Prepare the computer for disassembly (see Preparation for disassembly on page 12).
2. Remove the access panel (see Access panel on page 13).
3. Remove the front bezel (see Front bezel on page 14).
4. Disconnect the storage device power and SATA cables (1) from the storage device.
5. Squeeze and hold the drive cage release tabs (2).
6. Remove the drive cage (3) from the computer.
7. Separate the drive cage retention arms (1) from the storage device, making sure the retention pins fully
release from the device.
8. Remove the storage device (2) from the drive cage.
Reverse this procedure to install the storage device.
Storage device 15