Maintenance and Service Guide

MicroSD memory card reader module
Follow these steps to remove the MicroSD memory card reader module:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 12).
2. Remove the access panel (see Access panel on page 13).
3. Remove the front bezel (see Front bezel on page 14).
4. Disconnect the MicroSD memory card reader module cable (1) from the system board.
5. Press in on the retention tab (2) that secures the module to the chassis.
6. Slide the MicroSD memory card reader module (3) left and remove it from the chassis.
Reverse this procedure to install the MicroSD memory card reader module.
MicroSD memory card reader module 17