Maintenance and Service Guide

USB Type-C module
Follow these steps to remove the USB Type-C module:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 12).
2. Remove the access panel (see Access panel on page 13).
3. Remove the front bezel (see Front bezel on page 14).
4. Disconnect the USB Type-C module cable (1) from the system board.
5. Press in on the retention tab (2) that secures the module to the chassis.
6. Slide the USB Type-C module (3) right and remove it from the chassis.
Reverse this procedure to install the USB Type-C module.
18 Chapter 4 Removal and replacement procedures