Maintenance and Service Guide

Front antenna
Follow these steps to remove the front antenna:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 12).
2. Remove the access panel (see Access panel on page 13).
3. Remove the front bezel (see Front bezel on page 14).
4. Disconnect the WLAN module antenna cables (see WLAN module on page 19).
5. Remove the Torx15 screw (1) that secures the antenna to the chassis.
6. Remove the front antenna (2) from the chassis.
Reverse this procedure to install the front antenna.
22 Chapter 4 Removal and replacement procedures