Quick Specs

QuickSpecs
HP Z2 Mini Workstation
System Technical Specifications
c05262508 — DA – 15679 Worldwide — Version 10 — August 9, 2018
Page 18
USB Connector(s)
Front
Side I/O:
2 USB 3.0 Type-A
Rear
2 USB 3.0 Type-A
2 USB 3.1 G1 Type-C™ (Z2 Mini Performance only)
HD Integrated Audio
Yes; supports CTIA headset
Flash ROM
Yes
Chassis Fan Header
Yes
Additional CPU/GFX Cooler (Z2 Mini Performance only)
Front Control
Panel/Speaker Header
Side I/O: Yes
CMOS Battery Holder -
Lithium
Yes
Integrated Trusted
Platform Module
Integrated TPM 2.0
Power Supply Headers
Yes, single DC-in jack for external power supplies
Power Switch, Power LED
& Hard Drive LED Header
1. The power and failure LED are combined in the front power switch.
2. The HDD LED & DC-in LED are combined within one port on the Rear I/O. The LED will be lit once the
AC power is plugged in. As soon as the system is booted up, the LED will function as a standard HDD
activity LED.
Clear Password Jumper
Yes
Keyboard/Mouse
USB
Power Supply
Z2 Mini G3 Entry: 135W, 88% efficiency, wide-ranging, active PFC Power Supply
Z2 Mini G3 Performance: 200W, 89% efficiency, wide-ranging, active PFC Power Supply
The Z2 Mini PSU Efficiency Report can be found at this link: TBD
Operating Voltage Range
115-230 VAC
Rated Voltage Range
100–240 VAC
Rated Line Frequency
50-60 Hz
Operating Line Frequency
Range
47–63 Hz
Rated Input Current
Z2 Mini G3 Entry: 1.9A @ 90Vac
Z2 Mini G3 Performance: 2.9A @ 90Vac
Heat Dissipation
Typical: TBD btu/hr (TBD kcal/hr)
Maximum: TBD btu/hr (TBD kcal/hr)
ENERGY STAR® qualified
(Config Dependent)
Yes
FEMP Standby Power
Compliant
Yes, with Wake-on-LAN disabled: <1W in S5- Power Off
Surge Tolerant Full
Ranging Power Supply
Yes