Quick Specs

QuickSpecs
HP Z2 Mini Workstation
System Technical Specifications
c05262508 — DA – 15679 Worldwide — Version 10 — August 9, 2018
Page 25
Physical Security and Serviceability
Access Panel
Tool-less
Includes system board and memory information
Hard Drives
HDD cage requires the use of a screwdriver to remove the HDD
Expansion Cards
M.2 module requires a screwdriver to service and replace.
Processor Socket
Tool-less, except for the processor heatsink.
Color-coordinated Cables
and Connectors
Yes
Memory
Tool-less
System Board
Screw-In
Dual Color Power and HD
LED on Front of Computer
The Power LED is on the front of the system, but the HDD LED is located on the Rear of the system
Configuration Record SW
Yes
Over-Temp Warning on
Screen
Yes
Restore CD/DVD Set
Consists of an operating system DVD (OSDVD) and a driver DVD (DRDVD). OSDVD restores the original
operating system. DRDVD will provide all drivers for the system. The DRDVD may also contain
applications that originally shipped with the system for optional installation. Applications can also be
obtained from HP.com. OSDVD and DRDVD are orderable with the system and available from HP
Support.
Dual Function Front
Power Switch
Yes, causes a fail-safe power off when held for 4 seconds (default) or 15 seconds (can be configured by
F10 BIOS setup\Advanced\System Options\Power button override)
Cable Lock Support
Yes, Kensington Cable Lock (optional): Locks top cover from being opened and secures chassis to
furniture to prevent theft
3 mm x 7 mm slot at rear of system
Serial, Parallel, USB,
Audio, Network,
Enable/Disable Port
Control
Yes, enables or disables serial, USB, audio, and network ports (parallel port is not supported on the Z2
Mini G3)
Removable Media
Write/Boot Control
Yes, prevents ability to boot from removable media on supported devices (and can disable writes to
media)
Power-On Password
Yes, prevents an unauthorized person from booting up the workstation
Setup Password
Yes, prevents an unauthorized person from changing the workstation configuration