Quick Specs

QuickSpecs
HP Z2 Mini Workstation
System Technical Specifications
c05262508 — DA – 15679 Worldwide — Version 10 — August 9, 2018
Page 17
System Board
System Board Form
Factor
Entry: 200mm x 200mm (7.9 x 7.9 inches)
Performance: 200mm x 200mm (7.9 x 7.9 inches)
Processor Socket
Single LGA 1151
CPU Bus Speed
DMI link between CPU & PCH: Performance comparable to PCIe Gen3 x4
Chipset
Intel® PCH C236
Memory Expansion Slots
2 SODIMM DDR4 memory slots
Memory Type Supported
DDR4, UDIMM (Unbuffered), ECC & non-ECC
Memory Modes
Non-Interleaved for single channel. Interleaved when both channels are populated.
Memory Speed Supported
2133MHz DDR4 for Skylake processors; pre-enabled for 2400 MHz DDR4
Memory Protection
ECC available on data
*Requires ECC DIMMs to be installed, as well as a CPU that supports ECC
Maximum Memory
32GB
Memory Configuration
(Supported)
4GB, 8GB and 16GB non-ECC/ 8GB and 16GB ECC unbuffered DIMMs are supported.
ECC and non-ECC memory DIMMs cannot be mixed on the same system.
Notes
Maximum memory capacities assume 64-bit operating systems, such as Windows® 7 Professional 64-
Bit or Red Hat Linux 64-bit.
Supported Drive
Interfaces
SATA
Integrated (1) Serial ATA interfaces (6Gb/s SATA).
Integrated Graphics
Intel® HD Graphics 530 (on Core™ i3/i5/i7-6xxx processors);
Intel® HD Graphics P530 for Xeon® E3 processors based on Unified
Memory Architecture (UMA).
A region of system memory is reserved and dedicated to the graphics
display.
Support for Microsoft DirectX 12.1, OpenGL 4.4 and OpenCL 2.0 on Intel®
HD Graphics P530.
(3) DP 1.2 graphics ports integrated on motherboard; Supports up to
three simultaneous displays across DP outputs.
Max. resolution supported: 4096x2160 @60Hz
Network Controller
Integrated Ethernet PHY Connection I219LM. Management capabilities:
WOL, PXE 2.1 and AMT 11.0
Serial
1 rear port (configurable option)
IEEE 1394 Connector(s)