Maintenance and Service Guide

Solid-state drive (SSD)
Table 5-3 Solid-state drive description and part number
Description Spare part number
Solid-state drive
128 GB L24339-001
256 GB L24340-001
512 GB L24341-001
16 GB Optane Memory Module L24342-001
32 GB Optane Memory Module + 512 GB solid-state drive L51797-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 34).
2. Remove the base enclosure (see Base enclosure on page 34).
Remove the solid-state drive:
1. Remove the Phillips M2.0×2.0 screw (1) that secures the drive to the system board.
2. Remove the drive by pulling it away from the connector (2).
NOTE: M.2 solid-state drives are designed with notches to prevent incorrect insertion.
Reverse this procedure to install the solid-state drive.
Component replacement procedures 39