Maintenance and Service Guide

Speakers
Table 6-2 Speaker description and part number
Description Spare part number
Speaker assembly (includes cable) L14368-001
Before removing the speaker, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 34).
2. Remove the base enclosure (see Base enclosure on page 34).
3. Remove the battery (see Battery on page 45).
4. Remove the hard drive (see Hard drive (HDD) on page 37).
5. Remove the solid-state drive (see Solid-state drive (SSD) on page 39).
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the two Phillips 6 mm screws (2) that secure the speakers to the computer.
3. Release the speaker cable (3) from the clips that secure it to the computer.
4. Lift the speakers (4) to remove them from the computer.
Reverse this procedure to install the speakers.
46 Chapter 6 Removal and replacement procedures for authorized service provider parts