User Guide

Setting up the monitor
Installing the monitor stand
IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
panel may cause non-uniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
1. Position the monitor head facedown on a at surface covered by a clean, dry cloth.
2. Slide the top of the mounting plate on the stand under the upper lip of the recess in the back of the
panel (1).
3. Lower the bottom of the stand's base (2) so that the mounting plate snaps into place.
4. The latch that secures the bottom of the mounting plate pops up when the stand is locked in place.
Setting up the monitor 5