User Guide

Installing a security cable
You can secure the monitor to a xed object with an optional security cable available from HP. Use the key
provided to attach and remove the lock.
Mounting the monitor head
The monitor head can be attached to a wall, swing arm, or other mounting xture.
NOTE: This apparatus is intended to be supported by UL– or CSA–Listed wall-mount bracket.
If the monitor is TCO certied, the power cord plugged into the monitor head must be a shielded power cable.
The use of a shielded power cable meets the TCO Certied criteria for monitor products. For information on
TCO requirements, go to www.tcodevelopment.com.
CAUTION: This monitor supports the VESA industry-standard 100 mm mounting holes. To attach a third-
party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm–long screws are required. Longer
screws may damage the monitor. It is important to verify that the manufacturer’s mounting solution is
compliant with the VESA standard and is rated to support the weight of the monitor head. For best
performance, use the power and video cables provided with the monitor.
12 Chapter 1 Getting started