HP EliteBook x360 1030 G2 - Maintenance and Service Guide

System board
NOTE: The system board spare part kit includes the processor, a graphics subsystem with UMA memory,
and replacement thermal material.
Description Spare part number
Equipped with an Intel Core i7-7600U 2.80-GHz (SC turbo up to 3.90-GHz) processor (4.0-MB
SmartCache, dual core, 7.5-W), 16.0-GB of system memory, and the Windows 10 operating system
920054-601
Equipped with an Intel Core i7-7600U 2.80-GHz (SC turbo up to 3.90-GHz) processor (4.0-MB
SmartCache, dual core, 7.5-W), 16.0-GB of system memory, and a non-Windows 10 operating system
920054-001
Equipped with an Intel Core i7-7600U 2.80-GHz (SC turbo up to 3.90-GHz) processor (4.0-MB
SmartCache, dual core, 7.5-W), 8.0-GB of system memory, and the Windows 10 operating system
920055-601
Equipped with an Intel Core i7-7600U 2.80-GHz (SC turbo up to 3.90-GHz) processor (4.0-MB
SmartCache, dual core, 7.5-W), 8.0-GB of system memory, and a non-Windows 10 operating system
920055-001
Equipped with an Intel Core i5-7300U 2.60-GHz (SC turbo up to 3.50-GHz) processor (3.0-MB
SmartCache, dual core, 7.5-W), 8.0-GB of system memory, and the Windows 10 operating system
917102-601
Equipped with an Intel Core i5-7300U 2.60-GHz (SC turbo up to 3.50-GHz) processor (3.0-MB
SmartCache, dual core, 7.5-W), 8.0-GB of system memory, and a non-Windows 10 operating system
917102-001
Equipped with an Intel Core i5-7200U 2.50-GHz (SC turbo up to 3.10-GHz) processor (3.0-MB
SmartCache, dual core, 7.5-W), 8.0-GB of system memory, and the Windows 10 operating system
917103-601
Equipped with an Intel Core i5-7200U 2.50-GHz (SC turbo up to 3.10-GHz) processor (3.0-MB
SmartCache, dual core, 7.5-W), 8.0-GB of system memory, and a non-Windows 10 operating system
917103-001
Equipped with an Intel Core i5-7200U 2.50-GHz (SC turbo up to 3.10-GHz) processor (3.0-MB
SmartCache, dual core, 7.5-W), 4.0-GB of system memory, and the Windows 10 operating system
917101-601
Equipped with an Intel Core i5-7200U 2.50-GHz (SC turbo up to 3.10-GHz) processor (3.0-MB
SmartCache, dual core, 7.5-W), 4.0-GB of system memory, and a non-Windows 10 operating system
917101-001
Before removing the system board, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 27), and then remove the following components:
a. Battery (see Battery on page 29)
b. Solid-state drive (see Solid-state drive on page 30)
c. Fan (see Fan on page 34)
d. Speakers (see Speakers on page 35)
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board
●
WWAN module (see WWAN module on page 31)
●
Thermal sensor board (see Thermal sensor board on page 33)
●
Heat sink (see Heat sink on page 46)
Component replacement procedures 43