Hardware Reference Guide

Removing the front bezel
1. Prepare the computer for disassembly (see Preparation for disassembly on page 6).
2. Remove the computer access panel. See Removing the computer access panel on page 7.
3. Lift up the three tabs on the side of the bezel (1), and then rotate the bezel o the chassis (2).
Removing a slim optical drive bezel blank
On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank before
installing an optical drive. To remove the bezel blank:
1. Remove the computer access panel and front bezel. See Removing the computer access panel on page 7
and Removing the front bezel on page 9.
Removing the front bezel 9