Hardware Reference Guide

4. Pull the latch (1) next to the drive outward, rotate the drive (2) up, and slide the drive out of the cage (3).
Installing a hard drive
1. Prepare the computer for disassembly (see Preparation for disassembly on page 6).
2. Remove the computer access panel. See Removing the computer access panel on page 7.
3. You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket similar to
the example shown below.
● Slide the 2.5-inch drive into the bay adapter bracket, ensuring that the connector on the drive is
fully inserted into the connector on the adapter bracket.
26 Chapter 2 Hardware upgrades