User Guide

Scan
You can scan documents, photos, and other paper types, and send them to a variety of destinations, such as a
computer or an email recipient.
●
Scan using HP printer software
●
Scan using Webscan
Scan using HP printer software
●
Scan to a computer
●
Scan to email
●
Create a new scan shortcut (Windows)
●
Change scan settings (Windows)
Scan to a computer
Before scanning to a computer, make sure you have already installed the HP recommended printer software.
The printer and computer must be connected and turned on.
In addition, on Windows computers, the printer software must be running prior to scanning.
To enable the scan to a computer feature (Windows)
If the printer is connected to the computer with a USB connection, the feature for scanning to computer is
enabled by default and cannot be disabled.
If you are using a network connection, follow these instructions if the feature has been disabled, and you wish to
enable it again.
1. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
2. Go to the Scan section.
3. Select Manage Scan to Computer.
4. Click Enable.
To scan an original from HP printer software (Windows)
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the HP printer software. For more information, see Open the HP printer software (Windows)
on page 38.
3. In the printer software, under Print & Scan , click Scan , and then click Scan a Document or Photo .
4. Under Scan Shortcuts, select the type of scan you want, and then click Scan .
ENWW Scan 67