HP PC Commercial BIOS (UEFI) Setup

HP PC Commercial BIOS (UEFI) Setup
July 2020
919946-004
© Copyright 2016-2019 HP Development Company, L.P.
8 Advanced Menu (2019 and older) 82
8.8 Built-in Device Options Menu
This menu provides settings for built-in devices on the system.
Table 53 Built-in Device Options Menu features
Feature
Type
Description
Default
Notes
 Embedded LAN
Controller
Setting
When checked, enables the integrated network
controller.
Checked
Wake on LAN
Setting
Allows the system to wake via Local Area Network
(LAN). The following settings are possible:
• Disabled
• Boot to Network
• Boot to Hard Drive
Boot to Network
 LAN Controller
Option (1) (2)
Setting
When checked, enables the integrated network
controller in the designated rear option slot.
Checked
Select
products only
 Allow No Panel
configuration
Setting
When checked, allows operation of the AiO 1000 base
unit without a boot warning for no panel attached.
Checked
AiO 1000 only
 Integrated
Video
Setting
When unchecked, disables the integrated video
device. When not using the integrated video, disabling
the integrated video will free some system memory.
Checked
Desktop with
discrete
graphics card
only
VGA Boot Device
Setting
The firmware can use only one graphics device when
booting up; so when there are multiple graphics
devices, this feature selects the graphics controller to
use as the primary VGA device during boot-up.
• Integrated graphics
• Add-in graphics cards (select products only)
Add-in graphics
is set as primary
Desktop with
discrete
graphics card
only
Video Memory Size
Setting
System memory reserved for video before loading the
OS. Settings vary by platform and generation.
Examples:
Intel:
• 64 MB
• 128 MB
• 256 MB
• 512 MB
AMD:
• 128 MB
• 256 MB
• 512 MB
• Auto
Intel: 64 MB
AMD: Auto