User Guide

Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the stand.
3. Connect a cable or cables to enable video.
NOTE: The monitor automatically determines which inputs have valid video signals. The inputs can be
selected by pressing the Menu button to access the on-screen display (OSD) menu and then selecting
Input Control.
● Connect one end of a USB Type-B cable to the USB Type-B upstream port on the rear of the monitor
and the other end to the USB Type-A port on the source device. This enables video and data pass-
through.
8 Chapter 1 Getting started