HP DesignJet T100 and T500 Printer Series - User Guide
4. Load sheets of paper into the tray with the printed side facing outwards. Ensure that the sheets are all of
the same size.
5. Adjust the tray to t the width of the paper.
View information about the paper
To view the loaded paper information, tap the icon of the active paper source.
The following information is displayed on the front panel:
● Paper type you have selected
● Roll or sheet status
● Width of the paper in millimeters (estimated)
If no roll and no single-sheet paper is loaded, the message Out of paper is displayed.
Maintain paper
To maintain paper quality, follow the recommendations below:
● Store rolls covered by another piece of paper or cloth
● Store cut sheets covered and clean or brush them before loading them in the printer
● Clean input and output platens
● Always keep the top cover of your printer closed
NOTE: Photo and coated paper requires careful handling, see Print is scued or scratched on page 97.
32 Chapter 5 Paper handling ENWW