HP DesignJet T100 and T500 Printer Series - User Guide

4. You can see further options by clicking the circular button in the lower right corner of the window.
NOTE: The Quality option here does not refer to the nal print quality but to the quality of AutoCAD
viewport objects that are sent for printing.
5. Select your printer and click the Properties button.
6. Select the Device and Document Settings tab, and click the Custom Properties button.
7. In the Paper/Quality or Paper tab (depending on the driver version), select the paper type that you intend to
use.
NOTE: If you select neither the paper source nor the paper type, the printer will not print on any protected
roll.
8. Select the print quality (your own choice between speed and quality of printing).
9. If you intend to print on roll paper, you must decide where the printer should cut the paper.
ENWW Print a project 53