HP DesignJet T100 and T500 Printer Series - User Guide
5. In the Paper/Quality tab, select the paper type that you intend to use.
NOTE: If you select neither the paper source nor the paper type, the printer will not print on any protected
roll.
6. Select the print quality (your own choice between speed and quality of printing).
7. If you intend to print on roll paper, you must decide where the printer should cut the paper.
● With the Windows V3 driver: Select the Paper/Quality tab, then click the Margins/Cutter Settings
button, then Clip content by margins.
● With the Windows V4 driver: Select the Layout tab, then in the Layout Mode area click With margins >
Clip content by margins.
8. Select the Layout/Output tab, then select the Autorotate option. Autorotation can help to avoid wasting
paper.
9. Click the OK button and save your conguration changes to a PC3 le.
10. When you have clicked the OK button in the Plot window, the printer will construct a print preview.
Using Adobe Photoshop
1. In Photoshop, click File > Print and then select your printer.
56 Chapter 7 Practical printing examples ENWW