- Hewlett-Packard Network Router User Manual

Xcvr Signal Polling
Enables the transmission of periodic self-addressed messages by the router
software. Messages are sent at 5-second intervals to verify proper
transceiver operation on the LAN port. When signal polling is enabled, the
port’s Net Fail LED indicates the loss of the transceiver connection even if
no packets are being transmitted, since the signal polling messages are sent
regularly. Also, when the router is reset and nothing is connected to the port,
the Netfail LED turns ON. An event message with the severity level of the
warning is also recorded.
Default: Inactive
Yes
Enables the transmission of periodic self-addressed messages.
No
Disables the transmission of periodic self-addressed messages.
Circuit
Parameters
4
Circuit Parameters
Parameters and Options
4-29