HP Notebook PC Reference GuideStartup Guide
Notice This manual and any examples contained herein are provided “as is” and are subject to change without notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard Co. shall not be liable for any errors or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual or the examples herein.
Important Safety Information CAUTION To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord to connect a modem to the telephone wall jack. When using your computer with a telephone connection, always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons: • Do not use this product with a telephone connection near water (for example, near a bathtub, sink, swimming pool, or in a wet basement).
USE. Customer may use the software on any one HP product. Customer may not network the software or otherwise use it on more than one HP product. Customer may not reverse assemble or decompile the software unless authorized by law. COPIES AND ADAPTATIONS. Customer may make copies or adaptations of the software a) for archival purposes or (b) when copying or adaptation is an essential step in the use of the software with an HP product so long as the copies and adaptations are used in no other manner.
Software is delivered and licensed as “Commercial computer software” as defined in DFARS 252-227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a), or as “Restricted computer software” as defined in FAR 52.227-19 (or any equivalent agency regulation or contract clause), whichever is applicable. The Customer agrees that it has only those rights provided for such Software by the applicable FAR or DFARS clause or the HP standard software agreement for the product involved.
Contents Getting Started with Your HP Notebook......................................................................11 HP Notebook Reference Guide ...................................................................................12 Taking Inventory.........................................................................................................14 What’s in the box?.................................................................................................14 To buy accessories..................
Working in Comfort with a Notebook PC ..................................................................46 Taking Care of Your Computer ..................................................................................48 To protect your hard disk drive .............................................................................48 To maintain your computer ...................................................................................48 To safeguard your data ............................................
To insert or remove a PC Card ..............................................................................80 Connecting External Devices......................................................................................82 To identify connectors for external devices...........................................................82 To connect a printer or other parallel device.........................................................83 To connect an external keyboard or mouse ..................................
To create a boot disk ...........................................................................................130 To replace a damaged Recovery CD ...................................................................130 To update the BIOS.............................................................................................130 To update Windows drivers.................................................................................131 HP Support and Service ..........................................
Getting Started with Your HP Notebook Reference GuideStartup Guide 11
Getting Started with Your HP Notebook HP Notebook Reference Guide HP Notebook Reference Guide You have several ways to get information in this online Reference Guide: • Click the Contents tab and browse through the table of contents. • Click the Index tab and look up subjects. • Click the Next and Previous buttons at the top of each page. • Click the Print tool to print individual pages.
Getting Started with Your HP Notebook HP Notebook Reference Guide Microsoft®, MS-DOS®, and Windows® are U.S. registered trademarks of Microsoft Corporation. Pentium® and the Intel Inside logo are U.S. registered trademarks and Celeron™ and SpeedStep™ are U.S. trademarks of Intel Corporation. TrackPoint™ is a U.S. trademark of International Business Machines. Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. Hewlett-Packard Company HP Notebook Customer Care 1000 NE Circle Blvd.
Getting Started with Your HP Notebook Taking Inventory Taking Inventory Congratulations! Your notebook computer sets a new standard in personal computing. Although compact and easy to carry, your computer is made with the quality and attention to detail that are the hallmark of Hewlett-Packard. Your computer has several features that make it convenient to use: • Two buttons provide convenient options for starting and stopping the computer.
Getting Started with Your HP Notebook Taking Inventory To buy accessories You can buy accessories for your computer online. For the latest accessories and options, visit the HP Notebook Web site (www.hp.com/notebooks). HP currently offers docking solutions, plug-in modules, and other accessories, such as the following: • AC adapter. • Floppy disk drive module. • External floppy disk drive cable. • Plug-in modules, such as CD-ROM drive, DVD drive, CD read/write drive, Zip drive, second hard disk drive.
Getting Started with Your HP Notebook Taking Inventory To find more information The following table lists other sources of information about your computer and related products. Source Description and Location Startup Guide This printed manual introduces your computer. It also contains setup instructions, basic operation guidelines, troubleshooting information, and warranty information.
Getting Started with Your HP Notebook Identifying Parts of the Computer Identifying Parts of the Computer Front View 1. One-Touch buttons 9. Module eject latch. 2. Sleep button. Suspends and resumes operation. 10. Volume control. 3. Keyboard status lights (left to right: Caps Lock, Num Lock, Keypad Lock, Scroll Lock). 11. Audio off button and audio-off light. 4. Power slide button. Turns the computer on and off. 12. Audio jacks (left to right): audio out (headphones), external microphone, audio in.
Getting Started with Your HP Notebook Identifying Parts of the Computer Back View 18. PS/2 keyboard or PS/2 mouse port (supports Y adapter). 22. External monitor port. 19. Two universal serial bus ports (USB). 24. AC adapter jack. 20. Serial port (COM1). Use this port for a serial mouse, modem, printer, or other serial device. 25. Modem port (on certain models) 21. Parallel port (LPT1). Use this port for a parallel printer or other parallel device, or to connect the floppy disk drive externally.
Getting Started with Your HP Notebook Identifying Parts of the Computer Bottom View 29. Plug-in module bay. Can contain a CD-ROM or DVD drive, floppy disk drive, secondary battery, or other plug-in module. 30. Main battery. 32. Hard disk drive. 33. RAM cover. 34. Mini-PCI cover (no user parts inside). 31. Main battery latch.
Getting Started with Your HP Notebook Identifying Parts of the Computer Status Lights The computer includes a number of status lights that report power and battery status, drive activity, and keyboard functions such as caps lock and num lock. The following diagram shows the status lights on the front of the computer. 1. Power mode. • On: the computer is on (even if the display is off). • Blinking: the computer is in Standby mode. • Off: the computer is off or in Hibernate mode. 2.
Getting Started with Your HP Notebook Identifying Parts of the Computer The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. 1. Caps Lock. Caps Lock is active. 2. Num Lock. Num Lock is active. (The Keypad Lock must also be on to use the embedded keypad.) 3. Keypad Lock. The embedded keypad is active (Fn+F8). Num Lock must also be on for the numeric keys— otherwise, cursor control is active. 4. Scroll Lock. Scroll Lock is active.
Getting Started with Your HP Notebook Setting Up Your Computer Setting Up Your Computer WARNING Improper use of keyboards and other input devices has been associated with ergonomic injury. For information about reducing your risk, see Working in Comfort in the online HP Library (for Windows ME, click Start, Help, Your HP Notebook), or visit our ergonomics Web site, www.hp.com/ergo. For a summary about working with a notebook computer, see “Working in Comfort with a Notebook PC” on page 46.
Getting Started with Your HP Notebook Setting Up Your Computer Step 1 – Install the battery WARNING Do not mutilate or puncture batteries. Do not dispose of batteries in fire, or they can burst or explode, releasing hazardous chemicals. Rechargeable batteries must be recycled or disposed of properly. Your computer is shipped with the battery installed. If the battery has been removed, you should install it: 1. Turn the computer upside down. 2.
Getting Started with Your HP Notebook Setting Up Your Computer To remove the battery 1. Do one of the following: • Plug in the AC adapter. • Shut down the computer or put it into Hibernate mode. 2. Slide the battery’s release latch, then lift the battery out of its compartment.
Getting Started with Your HP Notebook Setting Up Your Computer Step 2 – Connect AC power CAUTION Use only the HP AC adapter included with your computer (or other approved adapter). Using any other AC adapter could damage the computer and may void your warranty (see the warranty statement in this manual). • Plug in the AC adapter, and connect it to the AC adapter jack on the back of the computer. The computer’s battery then starts charging. While the battery is charging, you can continue with step 3.
Getting Started with Your HP Notebook Setting Up Your Computer Step 3 – Connect a phone line If your computer does not include a built-in modem, you can skip this step. Also, if you prefer, you can instead connect to a PC Card modem or an external modem. 1. Make sure the telephone line is an analog line, sometimes called a data line. (You must not use a digital line.) 2. Connect the telephone cord to the built-in modem. 3. Plug the other end of the phone cord into a telephone jack.
Getting Started with Your HP Notebook Setting Up Your Computer Step 4 – Turn on the computer • Press the blue sleep button above the keyboard. The computer then boots up, and Windows starts automatically. Hint If your computer does not turn on when operating on battery power, the battery may be out of power. Plug in the AC adapter and press the blue sleep button again. Leave the AC adapter plugged in for at least an hour.
Getting Started with Your HP Notebook Setting Up Your Computer Step 6 – Register your notebook Be sure to register your computer. Registering is free and fast, and ensures you will receive quicker, more personalized support. The information you provide during registration allows us to provide you with better products and services. Registering your computer does the following: • Records your ownership of the computer with Hewlett-Packard and provides access to service, support, and information.
Getting Started with Your HP Notebook Setting Up Your Computer What to do next Here are a few things you may want to try at this point: • If you’re not familiar with the version of Windows installed on your computer, click Start, Help or check the Windows manual to discover what’s new. • If your computer shipment includes a DVD drive or CD-RW drive, you also received special software for the drive— find the software CD in the box.
Basic Operation Reference GuideStartup Guide 31
Basic Operation Operating Your Computer Operating Your Computer You can start and stop your computer using its blue sleep button. However, at certain times you may want to use other methods to start or stop the computer— depending on power considerations, types of active connections, and start-up time. For information on caring for and protecting your computer, see “Operating Your Computer” in the online Reference Guide.
Basic Operation Operating Your Computer You can also customize the way these power modes work. See the chapter titled “Batteries and Power Management” in the online Reference Guide. Hint To boot from a floppy drive or CD-ROM or DVD drive, press ESC during reboot when the HP logo and prompt appear. Then select the removable floppy drive or CDROM/DVD drive as the temporary boot device.
Basic Operation Operating Your Computer To change the boot device The computer normally boots from its internal hard disk. You can also boot the computer from a floppy disk drive in the module bay, a CD-ROM or similar drive in the module bay, or an internal network interface card (NIC). 1. Click Start, Shut Down, Restart. 2. When the HP logo appears, press ESC to display the Boot menu. 3. Use the arrow keys to select the boot device, and press ENTER.
Basic Operation Operating Your Computer Moving and selecting 1. Place your hands in a normal typing position. 2. Pointing stick. With your index finger, press the pointing stick in the direction you want the pointer to move. Touch pad. Move a thumb or finger across the touch pad in the direction you want the pointer to move. 3.
Basic Operation Operating Your Computer To use the Fn hot keys The combination of the Fn key plus another key creates a hot key— a shortcut key sequence— for various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then release both keys. This hot key Fn+F1 Does this Decreases the display brightness. Fn+F2 Increases the display brightness. Fn+F5 Toggles among the built-in display, an external display, and simultaneous display on both.
Basic Operation Operating Your Computer Your computer is preconfigured to access the following services: 1. Internet web site 2. Outlook Express e-mail software 3. HP Presentation Ready 4. Button 4 (varies by region) To reprogram a One-Touch button 1. Click Start, Settings, Control Panel, then double-click Keyboard. 2. On the One-Touch buttons tab, click the button you want to reprogram. 3. Type a label for the button, then select the application, document, folder, or web site you want the button to open.
Basic Operation Operating Your Computer To use the Windows and Applications keys The Windows key brings up the Windows Start menu. This is the same as clicking the Start button on the taskbar. The Applications key brings up the shortcut menu for the current application. This is the same menu that appears when you right-click while pointing at the application.
Basic Operation Operating Your Computer To use the ALT GR key Non-U.S. keyboards have an ALT GR key to the right of the spacebar. This is a shift key that provides access to certain special keyboard characters. • For a character in the lower-right corner of a key, press and hold ALT GR to type the character. 1. Shifted. 2. Unshifted. 3. ALT GR. To adjust the display Changing the brightness • Press Fn+F1 or Fn+F2 to increase or decrease (respectively) the display’s brightness.
Basic Operation Operating Your Computer Changing icon and label sizes To enlarge icons and labels on your screen when using a high-resolution display, use [NAME UNDECIDED]. {INDEX ENTRIES} • Click Start, Programs, [LINK UNDECIDED]. If this program is not installed on your computer, you can download it from the HP Customer Care Web site (www.hp.com/go/support). Using an external monitor If you want, you can attach an external monitor to your notebook computer. See “To use an external monitor” on page 84.
Basic Operation Operating Your Computer To change computer settings for a presentation When you show a presentation to an audience, you’ll often want to adjust some of your video and power settings for the show. You can easily do this with HP Presentation Ready, an application that automatically adjusts your computer for slide shows and similar presentations, and also opens the presentation itself.
Basic Operation Securing Your Computer Securing Your Computer To set up password protection You can protect your computer from access by another user when you set up password protection, which is available through Windows ME, 98 or 2000 and through the BIOS Setup utility. For complete protection in Windows ME, 98 or 2000, set passwords in both places. To cancel password protection, set an empty password. BIOS Setup Utility (Windows ME, 98, or 2000) 1. Click Start, Shut Down, Restart. 2.
Basic Operation Securing Your Computer 4. On the Advanced tab, select the option to prompt for a password when the computer leaves Standby mode. To attach a security cable Your computer includes a built-in connector you can use to secure the computer with a cable and a lock (such as the Kensington MicroSaver lock system, available at many computer stores). 1. Wrap the cable around a secure object, such as a table leg. 2.
Basic Operation Securing Your Computer Your computer comes equipped with VirusScan. Before you can use VirusScan, you need to install it. 1. Click Start, Programs, VirusScan, Setup. 2. Follow the instructions as they appear on the screen. Once installed, you can get detailed instructions from VirusScan’s online Help. To set PC identification Pavilion models HP TopTools and PC identification are not supported on Pavilion models.
Basic Operation Securing Your Computer 2. When the HP logo appears, press F2 to enter the BIOS Setup utility. 3. From the Security menu, enable Password Required to Boot. 4. From the Security menu, enable Internal hard disk drive lock. 5. Press F10 to save and exit BIOS Setup.
Basic Operation Working in Comfort with a Notebook PC Working in Comfort with a Notebook PC WARNING Improper use of keyboards and other input devices has been associated with ergonomic injury. For more information about reducing your risk, visit our ergonomics Web site at www.hp.com/ergo— or see Working in Comfort in the online HP Library (for Windows ME, click Start, Help, Your HP Notebook). You can use your HP notebook computer virtually anywhere, anytime.
Basic Operation Working in Comfort with a Notebook PC • Try to type as lightly as possible. The notebook keyboard requires little force to activate. • Take frequent, short rest breaks–this is especially important in a mobile computing environment. • Portable computers weigh between approximately 1.4 and 3.7 kilos (3 and 8 pounds). When traveling, be sure to carry your computer properly to minimize strain on your body.
Basic Operation Taking Care of Your Computer Taking Care of Your Computer Use the following recommendations to maintain your computer during everyday use and prevent potential physical damage or data loss. To protect your hard disk drive Hard disk drives, as well as other internal components, are not indestructible and can be damaged by inappropriate handling and operation. • Avoid bumps or jolts. • Do not operate the computer while traveling over bumpy terrain.
Basic Operation Taking Care of Your Computer To safeguard your data • Do not use a pointing device or activate any other device that interrupts operation while the system is starting or stopping. • Back up your work regularly. Copy files to floppy, tape, or network drives. • Use a virus-scanning program (such as the VirusScan program included with your computer) to check the integrity of your files and operating system.
Basic Operation Taking Care of Your Computer • Do not use abrasive cleaners, especially on the display. Do not apply any cleaner directly to the display. Instead, apply the cleaner to a soft cloth and then gently wipe the display. • You can clean the keyboard with a vacuum cleaner to remove accumulated dust.
Batteries and Power Management Reference GuideStartup Guide 51
Batteries and Power Management Managing Power Consumption Managing Power Consumption When you’re running your computer on battery power, you will want to maximize operating time without compromising performance. Your computer is designed to help you reduce power consumption and extend battery life without needing to turn it off. • During idle periods, the computer automatically enters power-saving modes after specified timeout periods. You can adjust these timeouts to suit your working habits.
Batteries and Power Management Managing Power Consumption CAUTION Make a habit of saving your work before allowing your computer to enter Standby mode. If power is interrupted while the computer is in Standby mode, any information that was not saved will be lost. The computer can also enter Hibernate mode if battery power reaches a critically low level. (See “To respond to a low-battery warning” on page 55.
Batteries and Power Management Managing Power Consumption You can also customize SpeedStep to best suit your working environment. • To set the speed used by the processor when Windows is running, double-click the Intel SpeedStep Technology icon in the taskbar. To manage power manually In addition to allowing the computer to enter its power-saving modes automatically, you can also put it into any of the following three modes whenever you need to.
Batteries and Power Management Using Battery Power Using Battery Power For information about how your computer regulates its power consumption, and how you can manually reduce power consumption and extend the life of the computer’s battery, see the chapter titled “Batteries and Power Management” in the online Reference Guide.
Batteries and Power Management Using Battery Power Once the computer enters Hibernate mode, you won’t be able to turn it on again until you restore power by doing one of the following: • Replace the battery with a charged one. See “Step 1 – Install the battery” on page 23. • Plug in the AC adapter. See “Step 2 – Connect AC power” on page 25. • Install a charged secondary battery in the plug-in module bay. See “To use additional batteries” on page 55.
Batteries and Power Management Using Battery Power To get the most from your batteries Follow these suggestions to make your battery’s power last as long as possible. • Plug in the AC adapter, especially when using a drive in the module bay, or any external connections such as a PC Card or a modem. • Set the display brightness to the lowest comfortable level (Fn+F1).
Batteries and Power Management Using Battery Power • For long-term storage, the battery must be charged 20–50% to minimize capacity loss by self-discharge and to avoid deterioration of performance. Storing a fully charged battery can cause higher self-discharge and reduce its discharge capacity— even after recharging— as compared to a battery stored when charged 20–50%.
Modem and Network Connections Reference GuideStartup Guide 59
Modem and Network Connections Using the Modem Using the Modem If your computer has a modem port, you can connect your modem to a telephone line and communicate with other computers throughout the world. You can explore the Internet, send and receive e-mail messages, and use your PC to send and receive faxes.
Modem and Network Connections Using the Modem 2. Connect a telephone cord with an RJ-11 plug to the built-in modem. 3. Plug the other end of the phone cord into a telephone jack. If the plug on the phone cord doesn’t fit the jack, you may need to use an adapter. 5. Check your modem’s country or region settings: • Windows ME or 98: click Start, Settings, Control Panel, double-click Modems, then click Dialing Properties.
Modem and Network Connections Using the Modem failed connection, you must wait one hour before trying the number again. If you dial before the hour is up, you will get a message that says “black list.” • When using a modem in the Republic of South Africa, an external surge protector may be necessary in order to prevent computer damage by lightning or other electrical surges. Connect any approved surge protector to the modem cable whenever you are using the modem.
Modem and Network Connections Using the Modem To dial in to a network You can use the modem to dial in to a LAN (local area network) that supports dial-in connections. This gives you access to network resources from a remote location. • See Windows Help for information about setting up and using dial-in network connections— click Start, Help. To change your modem settings The modem is already set up to be compatible with telephone systems and modems in most areas.
Modem and Network Connections Using the Modem For example, to force a built-in Ambit modem to connect with the V.34 modulation, you can use the +MS command as shown in table of AT commands— type AT+MS=11 in the space for extra settings. To send and receive e-mail Sending and receiving e-mail requires an e-mail account with an Internet Service Provider or with your company’s communications system. If you are using AOL, e-mail services are part of your AOL service.
Modem and Network Connections Using the Modem on your computer. QuickLink fax software is included with Windows ME or 98 on the hard disk. To start QuickLink • Click Start, Programs, QuickLink, QuickLink. The first time you start QuickLink, the Setup Wizard steps you through the process of setting options and customizing the program for your personal use. Follow the onscreen instructions. If you’re unsure which setting to choose, accept the default choice. To send a fax 1.
Modem and Network Connections Using the Modem To set up for faxing 1. Click Start, Settings, Control Panel, Fax. Enter your fax information. 2. On the Advanced Options tab, add a fax printer. If you do not want to receive faxes, stop here. 3. On the Advanced Options tab, open the Fax Service Management window. 4. In the list under Fax, click Devices, then right-click the modem and click Properties. 5. On the General tab, enable the modem to receive faxes. 6.
Modem and Network Connections Connecting to a LAN Connecting to a LAN You can use the built-in LAN port, or optional wireless LAN connection if your computer is equipped with the appropriate hardware, to connect to a local area network (LAN). This gives you access to network resources, such as printers and file servers on your corporate network, and possibly to the Internet. To connect to a LAN 1. Check that the existing LAN supports Ethernet 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) connections. 2.
Modem and Network Connections Connecting to a LAN 2. The green light indicates that a link is established to the network.
Modem and Network Connections Making Wireless Connections Making Wireless Connections If your computer includes a wireless on-off button— located on the left side of the computer near the front— you can connect by radio to a wireless local area network (LAN) and access computers and other resources on the network. A wireless network provides all the functions of a typical “wired” network, but also provides for “roaming.
Modem and Network Connections Making Wireless Connections LAN Connection (Infrastructure) In an infrastructure network, your computer connects to a LAN (local area network) through a wireless access point. This gives you access to the resources on the network, such as printers, file servers, and possibly the Internet. Your network administrator can provide the settings you’ll need to connect to the wireless access point, as well as the additional settings you’ll need for the network itself. 1.
Modem and Network Connections Making Wireless Connections 2. The wireless indicator light is lit whenever the wireless function is on. If the indicator isn’t lit, do one of the following: Press the wireless on-off button. –or– Click the wireless link icon in the taskbar and select Wireless Radio On. If you’re within range of your wireless network, your computer automatically connects. To check the status of your wireless connection, click the wireless link icon in the taskbar and select Wireless Status.
Add-On Devices Reference GuideStartup Guide 73
Add-On Devices Using Plug-In Modules Using Plug-In Modules You can use any compatible plug-in module with your computer’s module bay, such as: • CD-ROM, DVD, or similar drive. • Zip drive. • Second hard drive. • Floppy disk drive. • Secondary battery. CAUTION Never remove a plug-in module without first notifying Windows— see “To replace a plug-in module” on page 74. Otherwise, you could lose data.
Add-On Devices Using Plug-In Modules CAUTION Before disconnecting a CD-ROM drive, DVD drive, or any other type of drive, you must either use the icon in the taskbar or shut down the computer— otherwise, you could lose data. For Windows ME, you must also do this before you insert a drive. Exception: for Windows ME or 98, you must shut down the computer before connecting or disconnecting a hard disk drive. Handle and store a module carefully when it’s out of the computer.
Add-On Devices Using Plug-In Modules 4. Grasp the module and pull it out. 5. Slide the new plug-in module into the computer until it clicks into place. 6. For Windows ME or 98, click OK to close the BayManager window. If you have a CD-ROM drive or other module in the module bay, you can connect the floppy disk drive to the parallel port. See “Using Plug-In Modules” in the online Reference Guide.
Add-On Devices Using Plug-In Modules To connect the floppy disk drive to the parallel port If you prefer, you can connect the floppy disk drive to your computer’s parallel port using an external floppy drive cable, available from HP. • Connect the F2008 cable directly to the floppy drive and to the computer parallel port. Before disconnecting the floppy disk drive, use the icon in the taskbar to stop the drive, or else shut down the computer. See “To replace a plug-in module” on page 74.
Add-On Devices Using Plug-In Modules Remove the CD. 3. Slide the tray back into the module to close it. If your computer loses power, or if you have removed the CD-ROM or DVD module from the computer, you can manually open the drive to remove a CD. Insert a straightened paper clip into the recessed hole on the front of the drive to open it. To play DVD movies If your computer came with a DVD drive, it also includes DVD player software that lets you play DVD movies.
Add-On Devices Using Plug-In Modules Refer to the software’s help for details about creating or copying CDs. HP recommends using HP C4403A (CD-R) or C4404A (CD-RW) media— read and write quality may vary for other media.
Add-On Devices Connecting PC Cards Connecting PC Cards The computer’s PC Card slots are available for storing data and expanding the communication capabilities of the computer. The computer supports standard Type I, II, and III PC Cards (PCMCIA and CardBus), and can hold two Type I or II cards or one Type III card. The lower slot supports Zoomed Video, which allows a zoomed video card to show highquality multimedia presentations. To insert or remove a PC Card Inserting a PC Card 1.
Add-On Devices Connecting PC Cards 2. Press the eject button to pop the button out, then press it in to eject the PC Card. Finding tested PC Cards For the current listing of PC Cards that have been tested and approved for use with your computer, visit the Accessories section of the HP Notebook Web site (www.hp.com/notebooks).
Add-On Devices Connecting External Devices Connecting External Devices To identify connectors for external devices The diagram below shows your computer’s connectors for external devices. 1. PS/2 keyboard or PS/2 mouse port (supports Y adapter). 2. Two universal serial bus (USB) ports. 3. Serial port (COM1). 4. Parallel port (LPT1). Use this port for a parallel printer or other parallel device, or to connect the floppy disk drive externally. 5. External monitor port. 6. Docking port. 7.
Add-On Devices Connecting External Devices Note Before you connect any device, check its documentation to see if you need to make any settings or adjustments to the equipment before using it. This might include setting switches to configure the equipment so that it will operate properly with your computer and the software you plan to use.
Add-On Devices Connecting External Devices Note If you have problems making this connection, contact the device manufacturer and the HP Customer Care Web site (www.hp.com/go/support) for the latest version of the driver for the device. To connect an audio device Your computer includes a built-in microphone (just in front of the blue sleep button) that you can use to record voice, sound, and music.
Add-On Devices Connecting External Devices Switching the display to the external monitor • Press Fn+F5 (or CTRL+ALT+F5 on an external keyboard) to cycle through the display options: notebook display, external monitor, both. • If you need to use both displays at once, press Fn+F5 repeatedly until the image shows on both displays.
Add-On Devices Connecting External Devices Changing display actions With a display attached, you can use the BIOS Setup utility to change certain display behaviors, such as stretching the image to fill the screen at lower resolutions. See “To run the BIOS Setup utility” on page 122. For a display connected to a video adapter in a docking system, the docking display is automatically selected when it is detected. To change this behavior, change the Primary Video Adapter setting in BIOS Setup.
Add-On Devices Connecting External Devices To connect a serial device The computer includes a standard 9-pin serial port that you can use to connect devices such as external modems and fax modems. If needed, you can set the serial port’s address in the BIOS Setup utility. • Connect the device’s serial cable to the computer’s serial port.
Add-On Devices Connecting External Devices Printing to an infrared printer • Install your printer and assign it to the computer’s infrared port. You can then print from your applications as you would to any other printer. Transferring files through an infrared connection You can use your computer’s infrared port to transfer files. In Windows ME or 2000, you can use Wireless Link.
Add-On Devices Connecting External Devices 2. Push down firmly on both sides of the tray until it snaps into place. To remove a tray from the dock, pull the latch (at the center front of the dock) towards you until the tray pops free. Docking the computer The computer can be on, suspended, or off when docking. 1. Connect power to the dock— the type of connection depends on the dock. See the manual that came with the dock. 2.
Add-On Devices Connecting External Devices 3. Position your fingers on the platform grips as shown below. Use your thumbs to push the computer into the dock until the computer slides into place. Undocking the computer 1. Press the undock button on the front of the dock and wait for the undock light to blink. Then position your thumb as shown and pull the release lever forward. 2. Remove the computer from the dock.
Add-On Devices Installing Additional RAM Installing Additional RAM The computer has no memory (RAM) built in but has two slots that hold two RAM modules. One slot contains a RAM module installed at the factory. You can use both slots to expand your RAM. Use HP PC-133 or higher SDRAM only. To install a RAM expansion module You’ll need a small Phillips screwdriver for these steps. CAUTION Your computer’s chips are extremely sensitive to static electricity, and can be permanently damaged by it.
Add-On Devices Installing Additional RAM 4. Insert the RAM board into the connector at about a 30° angle until it is fully inserted. Then press down at both sides until both latches snap closed. 5. Replace the cover. 6. Insert the battery.
Add-On Devices Installing Additional RAM 2. Important: Unplug the AC adapter, if present, and remove the battery. Remove the secondary battery if one is installed. 3. Turn the unit bottom-side up, remove the screw holding the RAM cover, and remove the cover. 4. Release the two latches at the sides of the RAM board, so the free edge of the board pops up. 5. Pull the board out of the connector. 6. Replace the cover. 7. Insert the battery.
Add-On Devices Replacing the Hard Disk Drive Replacing the Hard Disk Drive To replace the hard disk drive You’ll need a small Phillips screwdriver for this procedure. 1. Unplug the AC adapter if you’re using one, and remove the battery. 2. Turn the unit bottom side up and remove both hard drive screws. 3. Raise the cover on the end of the drive so that its retainer tab is free of the computer casing, then gently pull the hard drive out of the computer. 4.
Add-On Devices Replacing the Hard Disk Drive To replace the hard disk drive holder If you are installing a new hard drive that does not have a cover, you can remove the cover parts from the old hard drive. You’ll need a small Phillips screwdriver for this procedure. 1. Remove all four screws from the holder and drive case, then lift the drive out of the holder. 2. Notice that the hard drive has a pin connector attachment at one end. Carefully remove this connector from the end of the drive.
Add-On Devices Replacing the Hard Disk Drive • If you want to restore the Windows software and operating system that were originally installed on your computer, you can do so using the Recovery CD that also came with your computer. See “To recover the factory installation of your hard disk” on page 129.
Troubleshooting and Maintenance Reference GuideStartup Guide 97
Troubleshooting and Maintenance Troubleshooting Techniques Troubleshooting Techniques This section contains solutions to a many types of problems you might have with your computer. Try the solutions one at a time, in the order in which they are presented. This section contains solutions to a few basic problems you might have with your computer. Try the solutions one at a time, in the order in which they are presented.
Troubleshooting and Maintenance Troubleshooting Techniques • When you are operating your computer in MS-DOS mode (for example, when running MS-DOS games), you may find that the sound does not operate properly. Use Windows applications for full use of sound capabilities. If sound does not record • Check the software controls for recording sound: click Start, Programs, Accessories, Multimedia (or Entertainment), Sound Recorder.
Troubleshooting and Maintenance Troubleshooting Techniques If a DVD movie stops playing in the middle • The DVD may be double-sided. Open the DVD tray, and read the text near the center hole of the disc. If it says Side A, flip the disc over, close the tray, and press the Play button to continue playing the movie. • You may have accidentally paused the DVD movie. Press the Play button to resume.
Troubleshooting and Maintenance Troubleshooting Techniques If the computer can’t find Wordpad.exe after inserting a CD • The system is trying to open a .doc file in WordPad, but cannot find the Wordpad.exe program file. Type C:\Program Files\Accessories in the error message box. Display Problems If the computer is on, but the screen is blank • Move the mouse or pointing stick, or tap the touch pad. This will wake the display if it is in Display-off mode.
Troubleshooting and Maintenance Troubleshooting Techniques If one or more display pixels look bad TFT display manufacturing is a highly precise but imperfect technology, and manufacturers cannot produce displays that are cosmetically perfect. Most, if not all, TFT displays exhibit some level of cosmetic imperfection. These cosmetic imperfections may be visible under varying display conditions, and can appear as bright, dim, or dark spots.
Troubleshooting and Maintenance Troubleshooting Techniques If the drive A icon is missing for the floppy drive when docked • For Windows 98, if you insert the floppy drive after docking, the drive A icon may not be available. To be recognized, the drive must be present when the computer docks or boots. If the drive A icon is missing, either dock the computer again with the floppy drive installed, or reboot the computer.
Troubleshooting and Maintenance Troubleshooting Techniques • If necessary, you can format the hard disk and reinstall the original factory software. See “To recover the factory installation of your hard disk” on page 129. Heat Problems Your computer normally gets warm during routine operation. If the computer gets abnormally hot • Always set the computer on a flat surface, so that air can flow freely around and underneath it.
Troubleshooting and Maintenance Troubleshooting Techniques • For Windows 98, see c:\hp\Drivers\Ir\Readme.txt for additional information. Keyboard and Pointing Device Problems If the pointer is difficult to control • Adjust the pointer controls: click Start, Settings, Control Panel, the double-click Mouse. If the touch pad or pointing stick doesn’t work • Don’t move the pointer or touch the touch pad while the computer is rebooting or resuming from Standby mode.
Troubleshooting and Maintenance Troubleshooting Techniques • Suspend or shut down the computer before you attach the scroll mouse, so that it will be detected properly. If you want to use the touch pad again, you must suspend or shut down the computer before you detach the scroll mouse. • Test the keyboard and pointing devices with the e-DiagTools diagnostics. See “Testing the Hardware” on page 120. If the embedded numeric keypad doesn’t work • To type numbers, make sure Num Lock is on.
Troubleshooting and Maintenance Troubleshooting Techniques • If the green light next to the LAN port does not light, the LAN cable may not be connected to the network or the network may be down. Try connecting a different computer to the cable. • For Windows ME or 98, open Network in Control Panel. Make sure you have the correct clients and protocols installed. • Make sure the LAN cable is Category 3, 4, or 5 for 10Base-T operation, or Category 5 for 100Base-TX operation.
Troubleshooting and Maintenance Troubleshooting Techniques • If you’re using Windows 98, use the Memory Troubleshooter in Windows Help: click Start, Help. • If you are having memory problems while running MS-DOS programs, use the MS-DOS Troubleshooter in Windows Help: click Start, Help. • Not all third-party memory cards have been tested for use with the computer. Please check the HP Notebook Web site (www.hp.com/notebooks) for a list of approved and tested memory cards.
Troubleshooting and Maintenance Troubleshooting Techniques • If you’re in a foreign country, the dial tone may not be recognized by the modem. In Control Panel, open Modems (Windows ME or 98) or Phone And Modem Options (Windows 2000). Try disabling the option that waits for a dial tone. If the modem dials incorrectly • Check the telephone number you entered, including any digits required for outside access or long distance.
Troubleshooting and Maintenance Troubleshooting Techniques • Check the speaker volume setting. • In Control Panel, open Modems (Windows ME or 98) or Phone And Modem Options (Windows 2000). Select the modem and click Properties, then check the volume setting on the General tab. If the modem connects, but transferred data is bad • In Control Panel, open Modems (Windows ME or 98) or Phone And Modem Options (Windows 2000).
Troubleshooting and Maintenance Troubleshooting Techniques PC Card (PCMCIA) Problems If the notebook doesn’t recognize a PC Card • Remove and reinsert the PC Card. • Insert the PC Card in a different slot. • Press the blue sleep button to suspend the computer, then press it again to resume. • Restart the computer: click Start, Shut Down, Restart. • If the card requires an IRQ, make sure one is available.
Troubleshooting and Maintenance Troubleshooting Techniques If an I/O card stops communicating properly • Exit and restart the application. The card may have been reset if the computer suspended or turned off. • Check settings in Control Panel. Performance Problems For best performance with Windows 2000, your computer should have at least 128 MB of memory (RAM). If the computer pauses or runs sluggishly • This may be normal Windows behavior. Background processing can affect response time.
Troubleshooting and Maintenance Troubleshooting Techniques • Slide and hold the power button for at least four seconds to turn off and reset the computer. Then press the blue sleep button to turn the computer back on. • If nothing happens, insert a straightened paper clip into the system-off switch on the right side of the computer. Then press the blue sleep button to turn the computer back on.
Troubleshooting and Maintenance Troubleshooting Techniques If the computer has a short operating time • Try conserving power using any of the suggestions listed in “To get the most from your batteries” on page 57. • If you are running an application that has an automatic save feature (such as MS Word), disable this feature or increase the specified save time to reduce hard disk access.
Troubleshooting and Maintenance Troubleshooting Techniques • For Windows ME or 98, check the Hibernate timeout in BIOS Setup— see “To run the BIOS Setup utility” on page 122. If your computer has more than 768 MB of RAM, you must expand the Utility partition on the hard disk— see “To recover the factory installation of your hard disk” on page 129. If the Standby option is missing from the Shut Down window • Do not allow Windows 98 to disable APM.
Troubleshooting and Maintenance Troubleshooting Techniques If an infrared printer doesn’t print • Make sure the line between the two infrared ports is not blocked, and that the ports face each other as squarely as possible. (The computer’s infrared port is on its right side, beneath the volume control.) The ports should be no more than 1 meter apart. • Make sure the printer is on and has paper in it. • Check for printer errors. • Make sure Windows is running; otherwise infrared printing is not available.
Troubleshooting and Maintenance Troubleshooting Techniques • Make sure the port connection is secure. • Check the modem settings in Control Panel: click Start, Settings, Control Panel, then double-click Modems (Windows ME or 98) or Phone and Modem Options (Windows 2000). • Make sure the serial port is enabled in BIOS Setup— see “To run the BIOS Setup utility” on page 122. • Disable the internal modem: 1. Open the hardware Device Manager. 2. Double-click Modem to list the current modem devices. 3.
Troubleshooting and Maintenance Troubleshooting Techniques Startup Problems If the computer doesn’t respond when you turn it on • Connect the AC adapter. • Press the blue sleep button to try turning on the unit. • Reset the computer by inserting a straightened paper clip into the system-off switch on the right side of the computer. Then press the blue sleep button to turn it on.
Troubleshooting and Maintenance Troubleshooting Techniques Wireless Problems If you have problems with wireless communication • Make sure the wireless indicator light is on. • See “LAN problems” on page 106. If you have trouble connecting to another computer in the Network Neighborhood • Wait a few minutes, then press F5 to refresh the list of computers on the network. • Click Start, Find, Find Computer to locate the computer.
Troubleshooting and Maintenance Testing the Hardware Testing the Hardware The e-DiagTools hardware diagnostic program included with your computer provides two levels of testing: • Automated testing using its basic hardware test. • Advanced testing using individual hardware tests. The tests are designed to run after the system reboots. This ensures that the computer will be in a predictable state, so the diagnostic program can properly test the hardware components.
Troubleshooting and Maintenance Testing the Hardware 9. Select and run the appropriate tests. Tests are not listed if no such hardware is detected. Press the following keys to run tests: ENTER Runs the highlighted test. F5 or SPACE Marks or unmarks the highlighted test. F6 Marks or unmarks all tests in the current menu. F7 Marks or unmarks all tests in all menus. F10 Runs all marked tests. 10. Save the Support Ticket.
Troubleshooting and Maintenance Configuring the Computer Configuring the Computer Your computer includes two tools that help you configure its operation: the BIOS Setup utility and HP TopTools. To run the BIOS Setup utility The BIOS (Basic Input and Output System) Setup utility enables you to make changes to the computer’s system configuration, and to tailor the operation of your computer to your individual work needs.
Troubleshooting and Maintenance Configuring the Computer Main Menu Setting Description Default BIOS Revision Shows the current BIOS version. Detected automatically. System Time Sets the time using 24-hour format. Values set take effect immediately. System Date Sets the date using dd/mm/yy format (except English, which uses mm/dd/yy format). Floppy Drive Sets the floppy drive type. Detected automatically. Internal Hard Disk Sets the hard disk drive type and various parameters.
Troubleshooting and Maintenance Configuring the Computer System Devices Menu Setting Description Default PS/2 Pointing Devices Disables the internal pointing devices when an external PS/2 mouse is connected. Auto External Fn Key Sets whether left CTRL+left ALT on an external keyboard is interpreted as the Fn key. Enabled FDD Controller Enables the floppy drive. Enabled Legacy USB Support Enables BIOS support for USB mouse, keyboard, and floppy disk drive.
Troubleshooting and Maintenance Configuring the Computer Security Menu Setting Description Default User Password is Shows if a user password is set. Clear Administrator Password is Shows if an administrator password is set. Clear Set User Password Press ENTER to set, change, or clear the user password. The password can have no more than 8 characters (0-9, A-Z), and cannot include special or accented characters.
Troubleshooting and Maintenance Configuring the Computer Power Menu Windows 2000 uses only the settings marked with *. Windows ME or 98 uses only the settings marked with * or **. All other settings in the Power menu are ignored. Setting Description Default Power Management Mode Disables time-outs, selects a combination of time-outs, or allows customized time-outs. Max. Power Savings Suspend Time-out Sets the period of inactivity after which the computer goes from Display-off to Standby power mode.
Troubleshooting and Maintenance Configuring the Computer Boot Menu Setting Description Default +Hard Disk +Removable Device CD-ROM/DVD Drive Intel Boot Agent Shows the order of boot devices, with “+” indicating a device category. Move the entries to change the order. If the computer has more than one device in a category, you can select the one scanned. Intel Boot Agent provides diskless boot from a network server. 1. Hard Disk* 2. Removable Device* 3. CD-ROM/DVD drive 4.
Troubleshooting and Maintenance Configuring the Computer 2. Follow the instructions that appear on the screen. TopTools can be run locally on an individual computer, or remotely by a network administrator. • To run TopTools locally, click Start, Programs, HP TopTools for Notebooks, HP TopTools. For information on manageable HP computers, HP TopTools, and how they lower PC operating costs, see the HP Web site at www.hp.com/toptools.
Troubleshooting and Maintenance Reinstalling and Updating Software Reinstalling and Updating Software You can use the Recovery CD to recover the original software build for your computer. The Recovery CD also provides Windows drivers specific to your computer to configure a custom system. You can find drivers in these locations: • On your computer’s hard drive under C:\hp\Drivers. • On the Recovery CD under \hp\Drivers. • On the HP Customer Care Web site (www.hp.com/go/support).
Troubleshooting and Maintenance Reinstalling and Updating Software 7. When the Recovery CD dialog box appears, follow the displayed instructions. If prompted, accept the recommended partition size. If you install the factory software, the recovery process can take up to 10 minutes. If you want to create the Utility partition without installing the factory software, click Advanced and select the option to not install the operating system.
Troubleshooting and Maintenance Reinstalling and Updating Software CAUTION Because a BIOS update replaces the previous version, you must follow these instructions exactly, or you risk damaging your computer. The BIOS update process resets the configuration settings in the BIOS Setup utility, except for the PC Identification and BIOS passwords. 1. In Windows, exit any programs that are running. 2. Remove any PC Cards. 3. If the computer is docked, undock it. 4. Connect the AC adapter. 5.
HP Support and Service Reference GuideStartup Guide 133
HP Support and Service Getting Assistance for Your Computer Getting Assistance for Your Computer To get help from the web HP has several web sites on the Internet dedicated to providing information to HP notebook computer users. The following sites are especially useful for helping you get support for your computer: • HP Customer Care web site. Get e-mail and telephone support information, technical information, and software updates. www.hp.com/go/support • HP Notebook Computer web site.
HP Support and Service Getting Assistance for Your Computer To contact the HP Customer Care Center by e-mail, visit the HP Customer Care web site (www.hp.com/go/support) under “Contact HP”. To call the Customer Care Center, check the HP Customer Care web site (www.hp.com/go/support) under “Contact HP” for the most complete and current list of phone numbers. If your HP notebook product is not normally sold by HP in the country of use, you must call a Customer Care Center that supports your notebook model.
HP Support and Service Getting Assistance for Your Computer North America United States: (970) 635-1000 Canada: (905) 206-4663 Mexico: Mexico City: 52-58-9922 Outside Mexico City: 01-800-472 6684 Guadalajara: 669-9500 Monterrey: 378-4240 South America Argentina: From Argentina: 0810-555-5520 Outside Argentina: 5411-4778-8380 Brazil: São Paulo: (11) 3747-7799 Outside São Paulo: 0800-157751 Venezuela: 0800-157751 Europe Austria: +43-(0)7114-20-1080 Belgium: Dutch: 32-(0)2-626-8806 French: 32-(0)2-626-8807 Cz
HP Support and Service Getting Assistance for Your Computer If your computer is under warranty. To receive warranty repair service, contact an HPauthorized reseller, or contact the HP Customer Care Center— see “To contact HP for support or service” on page 134. The support technician will help qualify your unit for warranty repair based on the warranty applicable to your unit and original purchase date, and will provide you with repair processes.
HP Support and Service Hewlett-Packard Limited Warranty Statement Hewlett-Packard Limited Warranty Statement 1. HP warrants to you, the end-user customer, that HP hardware, accessories and supplies will be free from defects in materials and workmanship after the date of purchase, for the period specified in the Warranty Duration sheet included with your HP notebook computer.
HP Support and Service Hewlett-Packard Limited Warranty Statement you might also have other rights that vary from country to country, state to state, or province to province. 7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES.
Reference Information Reference GuideStartup Guide 141
Reference Information Hardware Specifications Hardware Specifications Because we are constantly improving our products, the specifications shown below are subject to change. For the latest specifications, see the HP Notebook Web site (www.hp.com/notebooks). Physical Attributes Size (14-inch display): 316 × 261 × 33 mm (12.4 × 10.3 × 1.3 in). Size (15-inch display): 325 × 261 × 35 mm (12.8 × 10.3 × 1.4 in). Weight: 2.3–2.9 kg (5.0–6.4 lb), depending on configuration. Magnesium display cover.
Reference Information Hardware Specifications Keyboard and Pointing Devices 87/88-key touch-type QWERTY keyboard with 101/102 key emulation. Embedded numeric keypad. Left and right click buttons, center scroll button. 12 function (Fn) keys. 4 user-programmable One-Touch buttons. Two pointing devices: pointing stick and touch pad. LAN Ethernet 10Base-T (10 Mbps) and 100Base-TX (100 Mbps) support. Supports wake-on-LAN (Windows 2000), fast IP, DMI, dRMON.
Reference Information Hardware Specifications Security Features User and administrator passwords. System, hard drive, and docking passwords. PC identification displayed at boot. DMI-accessible electronic serial number. Kensington MicroSaver lock slot. Environmental Limits Operating temperature: 5 to 35 °C (41 to 95 °F). Operating humidity: 20 to 90 percent RH (5 to 35 °C). Operating altitude: up to 3000 m (10,000 ft) at 25 °C (77 °F). Storage temperature: –20 to 50 °C (–4 to 122 °F).
Reference Information Modem Reference Information Modem Reference Information If your computer has a modem port, you can customize the operation of the modem using AT commands and S-registers. You can do this from Modem (Windows ME or 98) or Phone And Modem Options (Windows 2000) in Control Panel, from most communications software, or by using terminal mode in your software. See “To change your modem settings” on page 63.
Reference Information Modem Reference Information Command Function (Ambit) I6 I7 L0 L1 L2 L3 M0 M1 M2 M3 N0 N1 O0 O1 P Q0 Q1 Sn Sn? Sn=v T V0 V1 W0 W1 W2 X0 Report modem data pump model and code revision Report the DAA code Set low speaker volume Set low speaker volume Set medium speaker volume Set high speaker volume Turn speaker off Turn speaker on during handshaking and turn speaker off while receiving carrier Turn speaker on during handshaking and while receiving carrier Turn speaker off during dial
Reference Information Modem Reference Information Command Function (Ambit) &D2 Interpret DTR On-to-OFF transition per &Qn &Q0 through &Q6: The modem hangs up Interpret DTR On-to-OFF transition per &Qn &Q0, &Q1, &Q4, &Q5, &Q6: Soft reset &Q2, &Q3: The modem hangs up Restore factory configuration 0 Restore factory configuration 1 Disable guard tone Disable guard tone Enable 1800 Hz guard tone Set S-Register response only for compatibility Set S-Register response only for compatibility Disable DTE/DCE flow
Reference Information Modem Reference Information Command Function (Ambit) &V1 &W0 &W1 &X0 &X1 &X2 &Y0 &Y1 &Zn=x %E0 %E1 %E2 %L %Q %TTn Display last connection statistics Store the current configuration as profile 0 Store the current configuration as profile 1 Select internal timing for the transmit clock Select external timing for the transmit clock Select slave receive timing for the transmit clock Recall stored profile 0 upon power up Recall stored profile 1 upon power up Store dial string x (up to 3
Reference Information Modem Reference Information Command Function (Ambit) +MS=a,b,c,d Select modulation (b, c, and d are optional) a is the mode (bps): 0=V.21 (300), 1=V.22 (1200), 2=V.22bis (2400, 1200), 3=V.23 (1200, 300), 9=V.32 (9600, 4800), 10=V.32bis (14400, 12000, 9600, 7200, 4800), 11=V.34 (33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800, 2400), 17=X2, V.
Reference Information Modem Reference Information Command Function (Ambit) +FRM=n +FRS=n +FTH=n +FTM=n +FTS=n Receive data Receive silence, n×10 ms Transmit data with HDLC framing Transmit data Stop transmission and wait, n×10 ms AT* Commands *B *Cn *NCn Display black-listed number Data calling tone selection Select country parameters: 0=US, 1=Japan, 2=Germany, 3=UK, 4=France, 5=Netherlands, 6=Italy, 7=Australia, 8=Sweden, 9=Denmark, 10=New Zealand, 11=Korea, 12=China, 13=Singapore, 14=Malaysia, 15=So
Reference Information Modem Reference Information Register Function (Ambit) Range/units Default S38 S39 S40 S41 S46 S48 S82 S86 S91 Delay before forced hangup Flow control bit mapped options status General bit mapped options status General bit mapped options status Data compression control V.
Reference Information Modem Reference Information Command Function (US Robotics) DL DL? DSn E0 E1 F0 F1 H0 H1 I0 I1 I2 I3 I4 I5 I7 I8 I10 I11 L0 L1 L2 L3 M0 M1 M2 M3 O0 O1 S$ Sr=n Sr? V0 V1 X0 Redial last number Display last dialed number Dial stored number (n=0,1,2,3) Turn command echo off Turn command echo on Turn online echo on Turn online echo off Hang up (go on-hook) Pick up (go off-hook) Display the 4-digit product code Display the checksum Display the RAM test results Display the firmware version
Reference Information Modem Reference Information Command Function (US Robotics) Z0 Z1 Z2 Z3 Z4 Z5 $ &$ &A0 &A1 &A2 &A3 &B0 &B1 &B2 &C0 &C1 &D0 &D1 &D2 &D3 &F0 Reset the modem according to the settings of ATY Reset the modem and use &W0 settings Reset the modem and use &W1 settings Reset the modem using &F0 settings and load factory default profile 1 Reset the modem using &F1 settings and load factory default profile 0 Reset the modem using &F2 settings and load factory default profile 2 Display the lis
Reference Information Modem Reference Information Command Function (US Robotics) &Nn Set link speed (bps): 0=Highest speed, 1=300, 2=1200, 3=2400, 4=4800, 5=7200, 6=9600, 7=12000, 8=14400, 9=16800, 10=19200, 11=21600, 12=24000, 13=26400, 14=28800, 15=31200, 16=33600, 17=28000, 18=29333, 19=30666, 20=32000, 21=33333, 22=34666, 23=36000, 24=37333, 25=38666, 26=40000, 27=41333, 28=42666, 29=44000, 30=45333, 31=46666, 32=48000, 33=49333, 34=50666, 35=52000, 36=53333, 37=54666, 38=56000, 39=57333 Ignore RTS
Reference Information Modem Reference Information Register Function (US Robotics) Range Default S15 Bitmapped register. 1=MNP/V.42 disabled in V.22 2=MNP/V.42 disabled in V.22bis 4=MNP/V.42 disabled V.32, V.34 8=Disable MNP handshake 16=Disable MNP level 4 32=Disable MNP level 3 64=Unusual MNP incompatibility 128=Disable V.42 136=Disable V.42 detection phase Bitmapped test register.
Reference Information Modem Reference Information Selected Result Codes (US Robotics) Code Meaning 0 1 2 3 4 5 6 7 8 OK CONNECT RING NO CARRIER ERROR CONNECT 1200 NO DIAL TONE BUSY NO ANSWER 156 Reference GuideStartup Guide
Reference Information Safety Information Safety Information Power Cords The power cord supplied with the computer’s AC adapter should match the plug and voltage requirements for your local area. Regulatory approval for the AC adapter has been obtained using the power cord for the local area. However, if you travel to a different area and need to connect to a different outlet or voltage, you should use one of the power cords listed below.
Reference Information Safety Information Ergonomics WARNING Improper use of keyboards and other input devices has been associated with ergonomic injury. For information about reducing your risk, see Working in Comfort in the online HP Library (for Windows ME, click Start, Help, Your HP Notebook, Working in Comfort), or visit our ergonomics Web site, www.hp.com/ergo.
Reference Information Safety Information Laser Safety The CD-ROM and DVD drives used with the computer are certified as a Class 1 laser devices according to the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard and International Standards IEC 825 / IEC 825-1 (EN60825 / EN60825-1). These devices are not considered harmful, but the following precautions are recommended: • Ensure proper use by reading and following the instructions carefully.
Reference Information Safety Information Exposure to Radio Frequency Radiation The radiated output power of the IEEE 802.11 internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the potential for human contact during normal operation is minimized.
Reference Information Regulatory Information Regulatory Information This section presents information that shows how your computer complies with regulations in certain regions. Any modifications to your computer not expressly approved by Hewlett-Packard could void the authority to operate the computer in these regions. U.S.A. This computer has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Reference Information Regulatory Information Declaration of Conformity (U.S.A.) Responsible Party: Hewlett-Packard Company Manager of Corporate Product Regulations 3000 Hanover Street Palo Alto, CA 94304 +1 (650) 857-1501 declares that the product(s) Trade name: Hewlett-Packard Company Product name: HP Omnibook 6100 Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Reference Information Regulatory Information necessary to use the equipment on a different telephone network. For further product support, contact Hewlett-Packard— see “To contact HP for support or service” on page 134. Die Geräte wurden gemäß Ratsentscheidung 98/482/EC für den Anschluss an eine einzelne Telefonbuchse im europäischen Raum (Public Switched Telephone Network) und drahtlose Funknetzwerke zertifiziert.
Reference Information Regulatory Information Japan Japan Telecommunications Approval JATE approval number: A00-0143JP, A99-0976JP Name of Equipment: T18M038.00, 3CN3BN1556B Russia International Products sold internationally by Hewlett-Packard and its authorized dealers meet the specifications listed on the following page.
Reference Information Regulatory Information Declaration of Conformity (according to ISO/IEC Guide 22 and EN 45014) Manufacturer’s Name: Manufacturer’s Address: Hewlett-Packard Company, Mobile Computing Division 19310 Pruneridge Ave., Cupertino, CA 95014, U.S.A.
Index ac (time-out), 126 ac adapter, 15 connecting, 26 accessories buying, 15 docking products, 88 plug-in modules, 74 adding RAM, 91 AdHoc wireless network, 69 setting up, 69 adjusting brightness, 36, 39 display colors, 39 screen area, 39 Agaté Tioman hot-swap installing, 74 using, 74 airplanes wireless communication in, 70 ALT GR key, 39 antistatic precautions, 91, 92 Applications key, 38 AT commands, 63, 145. See Reference Guide audio adjusting volume, 98 connecting devices.
port, 18 quality, 102 settings, 39 switching to external, 38 troubleshooting, 101 TV set, 86 display colors adjusting, 39 Display-off mode, 32 docking, 89.
keypad (embedded), 38 Keypad Lock, 17, 21 LAN connecting to, 67.
removing, 92 rebooting after shutdown, 32 boot device, 127 temporary boot device, 33 receiving faxes, 65, 66 recovering original software, 129 Recovery CD diagnostics, 121 replacing, 130 using, 129 registering computer, 28 regulatory information, 161 removing CD, 77 hard disk drive, 94 hard drive holder, 95 PC Card, 80 RAM, 92 secondary battery, 56 repair obtaining, 137 shipment, 137 repair service, 98, 137 resetting, 33 safety battery use, 158 infrared port, 159 laser, 159 power cords, 157 wireless communi
warranty repair, 137 web browser, 62 Web sites, 16 Windows documentation, 16 key, 38 password, 42 reinstalling, 129 setting up, 27 updating drivers, 131 wireless communication, 87 indicator light, 71 indicator light location, 18 on-off button, 69 restrictions on use, 70 status, 71 troubleshooting, 119 170 Reference GuideStartup Guide turning on, 70 wireless network, 69 AdHoc, 69 connecting to, 69 infrastructure, 70 Zip drive, 83 zoomed video, 80
